@ Quartzo,
Without section [autorad] in sys.txt, normally the speedcams are hidden. But when the program in turn on, the speedcams are displayed on the screen and not hidden
I cannot install the update from 07-01-2019. I had deleted the Save folder. I can still make the first settings in the configuration menu during Installation.
When everything is entered and I confirm with , then the program hangs up.
10-01-2019: with the following change the installation has worked now
old: ___ new:
[autorad] ___ [autorad]
;disabled=1 ___ disabled=0
;detect=10 ___ detect=15
Last edited by Ivka; 10th January 2019 at 07:14 PM.
@ Quartzo,
Without section [autorad] in sys.txt, normally the speedcams are hidden. But when the program in turn on, the speedcams are displayed on the screen and not hidden
After last update pongo –skin 07.01.2019, I found two problems, first, does not save car size, second, GPS altitude correction not saved. Both works ok when iGO running but after stop iOG and start up again these two items shows default value and must be set correct again. Someone who fix this in next update?
Problem solved, some times iGO use long time to shut down.
Last edited by Testrunner; 11th January 2019 at 04:19 PM.
Hi
Just tested Pongo's skin (update 07/01/2019) under iGO_PAL...
and do not encountered your two issues:
- car size modification correctly saved at reboot
- altitude correction also correctly saved at reboot
Last edited by BIBUOT; 9th January 2019 at 06:05 PM.
Hello,
@Phildu91 & aeribou
There is no problem operating with the original Pongo and a conforming [autorad] section in the sys.txt!
Hello to other poor frenchies confronted with speedcams on all roads
I confirm also ---> no issue with autorad function in original Pongo's skin
my sys.txt section:
[autorad]
disabled=0
detect=15
Last edited by BIBUOT; 9th January 2019 at 08:07 PM.
cant download latest pongo skin 7/1/19 can you post other links
hi
please, is there a way to sort out this problem. there is a problem with the speed calculation. if im doing 30mph the voice says im doing 50mph. maybe there is a problem converting kilometres with miles.
it is very confusing it makes you think that you are overspeed. In an average speedcam zone. the voice says your average speed is 60mph but im doing just 35mph. i looked in the skin option and there is no option for speed correction.
thanks
Last edited by mariop1; 10th January 2019 at 05:09 PM.
hi,
is it possible to announce the current limit in km/h by increasing the tempolimit ? In former versions of pongo skin this was done, today it only announce "overspeed".
All settings for the limit are activated and the tts-test is ok.
thx
Bookmarks