Thread: Skin iGO nextgen by pongo (DISCUSSION)

Update of skin by Pongo from 7.01.2019
Thanks to Pongo
Edit.....
Suspended File of The Server! Download From The First Post.

[Only registered and activated users can see links. ]

Skin_iGO_Nextgen_by_pongo+ux_plugins_2019.01.07

Thanks to pongo!

1st issue with autorad if in sys.txt we have
[autorad]
;disabled=1
at starup, autorad is active,and we can see speedcams.

2nd issue in Navigation Turn By Turn Mode: bad view on the screen

For the first issue see below pongo's answer

- The auto rad function is hidden radars on the map and speedcam tuning functions . Everything works automatically, when you turn on the navigation, there are no camera settings and the cameras themselves are not displayed on the map, but when the camera drives, it is displayed and sounded as before, the response threshold of 10 km / h can be changed independently by recording in sys.txt:

Code:

Please Login or Register to see the links

Camera settings are activated in the drag mode by long pressing on the bottom right button "Save Favorite"

The auto rad function can be disabled by writing to sys.txt:

Code:

Please Login or Register to see the links

I cannot install the update from 07-01-2019. I had deleted the Save folder. I can still make the first settings in the configuration menu during Installation.
When everything is entered and I confirm with , then the program hangs up.

10-01-2019: with the following change the installation has worked now

old: ___ new:

[autorad] ___ [autorad]
;disabled=1 ___ disabled=0
;detect=10 ___ detect=15

After last update pongo –skin 07.01.2019, I found two problems, first, does not save car size, second, GPS altitude correction not saved. Both works ok when iGO running but after stop iOG and start up again these two items shows default value and must be set correct again. Someone who fix this in next update?
Problem solved, some times iGO use long time to shut down.

Hi

Just tested Pongo's skin (update 07/01/2019) under iGO_PAL...

and do not encountered your two issues:

- car size modification correctly saved at reboot

- altitude correction also correctly saved at reboot