Likes: 
Thanks for answering
That's what the window reportsOriginally Posted by Butters
Spoiler: Screen gps
Spoiler: G7toWin
Yes, I used the one you provided.
Drivers version: 2.3.1.2
Updates correctly but does not recognize it as a drive
PC(W11 y XP(VM)) and notebook(W7). On PC rear USB ports
Two different cables, one longer and one shorter.
Thanks
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 10 of 20
Hybrid View
-
15th December 2023, 01:53 PM #1Member
- Join Date
- Dec 2023
- Location
- Argentina
- Posts
- 11
- Rep Power
- 0
Last edited by julianof; 15th December 2023 at 10:26 PM.
-
15th December 2023, 10:35 PM #2Important User
- Join Date
- Jul 2017
- Location
- CA
- Posts
- 1,466
- Rep Power
- 1059
Good, that's what i was hoping it was. Not an error message. Originally Posted by julianof
I know the HWID would be reported by G7ToWin as 1106 now, but what i asked was this: "Post to confirm that you used G7ToWin to obtain HWID of 1106 before you attempted any flashing with Updater.exe".Spoiler: G7toWin
Are you able to state 'yes' definitely to that or not?
The reason for asking is that there are 2 different hardware versions of 12xx with HWIDs of 1106 and 0971 running different firmwares. Flashing the other's fw, original or cure, will change the HWID but the device won't ever function as it should with wrong fw. I'm wanting to eliminate any chance at all that's happened. If you're not sure 100% that your device was always HWID 1106 please say so and then we can look further. I'd prefer know with certainty if the HWID was or wasn't changed inadvertently of course.
Latest version so that's not the problem.Drivers version: 2.3.1.2
I'm assuming you mean after using QuickCure3 the device still isn't recognised in Windows Disk Management or File Explorer.Updates correctly but does not recognize it as a drive
So flashing QC3 doesn't also result in the IOU message you saw from Updater when using Cure3?
Ok, very unlikely the comms issue is due to any of those then.PC(W11) and notebook(W7). On PC rear USB ports
.............
Two different cables, one longer and one shorter.
In "2-" of your initial post you mentioned that you tried flashing boot.bin only as an RGN and "Windows recognizes it but does not assign a letter to the drive". Please clarify which you mean: (i) it was seen only in Device Manager; or, (ii) it was seen in Disk Management but without a drive letter allocated?
Please answer all the 3 questions underlined. Be as accurate and informative as you can. If unsure just say that but don't guess.
Reply With Quote
Bookmarks