Quote Originally Posted by julianof View Post
...........
Please, if you would be so kind, do it for me. Thank you
No problem. Look behind the Spoiler below for the kit:
Spoiler: Click
[Only registered and activated users can see links. ]

Follow this guide:
  • Extract "SD_RGN41_Flash_Kit.zip" to find Garmin folder and 110601000630.rgn and Updater.exe
  • Put Garmin folder on a CLEAN microSD card (use a small card if possible, FAT16 or FAT32 only)
  • Insert the card into your nuvi with it completely OFF
  • Drag 110601000630.rgn onto Updater.exe to open its GUI
  • Continue with the previously written guide in Post #2 from Point 4 onwards to place the nuvi in preboot, connect it by USB, start Updater.exe, etc.
  • When the process finishes as indicated by Updater giving 'success' message, remove the microSD and post the contents of update.log now present in 1106 folder.

There should now be a new file named 41.bin created in the root of the card. Please keep a copy of it safely somewhere as we may need to flash it back later depending on what happens with further experimentation.

Note: This is entirely at your risk. I've taken care to make the kit correctly and no risk should result in it's proper use in a HWID 1106 device that only has a soft-bricking. However be aware that should your nuvi have a flash chip problem that it may fail at any time and it's most likely that would occur when it's being stressed while flashing.