I only saved the 41st bin file.
I used the Flash_Kit_0827_Hibrid_RGN file to convert 5it, I started this, I saw the firmware update on my laptop but when I started it hangs at the logo.

I only have a laptop. I don't know how to search the device manager because if I plug it in with Garmin, nothing new will appear.

When I disconnect it from the laptop, it doesn’t turn off just when I turn it off with a button. Hold it as if I were resetting, then the white display will flash twice and turn off.

[Only registered and activated users can see links. ]

It doesn't work either!

How Do You Enter Pre-Boot Mode On Your Garmin

Models nuvi: 205, 205W, 255, 255W, 265, 265W, 275, 285W 465
1. Turn off the Garmin.
2. Press and hold the upper left corner of the screen.
3. Start the Garmin.


Edit:

Successfully restored original state with Flash_Kit_0827_RGN file. But it didn't let me calm down and I tried again after seeing 0827 as the HWID number. But it stops at the logo again. Then back to 0827 RNG, success to original condition. Then I spotted it with myself because I sent the 0943 RNG right away and now it's trash because it doesn't even turn on.

It is now saved, but will no longer switch.

Garmin/Updtare/0827 folder:

[Only registered and activated users can see links. ]