Cyclop Safety Cameras for Garmin

**BalooDK** · 19th February 2019, 08:03 PM

Only on device, i don’t use sd card

**Giomen** · 20th February 2019, 04:02 AM

Originally Posted by BalooDK

I just found out that all the warnings you have screenshots off, are also showing up if i delete the cyclops files. I still don’t get any warnings when driving by a speed cam with the cyclops filen on my device

You have a very specific device.
Maybe it is getting real-time safety camera information from smartlink or traffic receiver. Maybe safety cameras are embedded in the map.

Try to get some information about the menu:
System-About-Safety cameras...

P.S. There is proven and not a bad way. Install Garmin trial Safety Cam. After that f.u.c.k brains to Garmin technical support up to a win.

**BalooDK** · 22nd February 2019, 08:43 PM

I do use Smartphone Link and I just tried to disable it, now the stationary speed cams show up. If I enable smartphone link again, I don't get any warning !!
That is just plain stupid

Can I disable speed cams in smartphone link, so that I still get weather and traffic ??

**quebec001** · 23rd February 2019, 05:01 PM

Originally Posted by BalooDK

Only on device, i don’t use sd card

And if you want to know if Cyclops is still INSTALLED or not in your GPS:

Spoiler: screenshots

**BalooDK** · 23rd February 2019, 05:08 PM

Thanks. They do show up in the About screen, and as I stated in the previous post, they only work if I disable Smartphone Link

**Tigeroods** · 1st April 2019, 12:57 PM

Tried to load unlocked version on DriveSmart 61 with firmware version 6.00, Cyclop is not getting recognized in Device About menu. Files were copied to POI folder. Also tried to patch firmware with FirmwarePatcher to remove MSV, GVS and GCD signature but issue remains on device DriveSmart 61 with firmware 6.00. Previous firmware had no issues with patching or loading Cyclop.

**michaeloli** · 2nd April 2019, 01:55 PM

Hi,Tigeroods.If your Garmin is locked,just use locked Garmin Cyclops.
i unlocked my SmartDrive 61 and 2699 with this tutorial.Just registred to the site and try.Translate with g...... translate and,goodluck.

Code:

Please Login or Register to see the links

**YasenPepper** · 18th April 2019, 03:43 PM

Please help!
I have DriveSmart 61 with fw ver. 6.00. Device was unlocked (patched), all unlocked maps displayed and functioning normally.
I tried to use unlocked (and locked too) Garmin Cyclops files - without result - NO any information about Cyclops in Device About menu.
I put files in POI folder. At the same time, USCanadaCyclopsSample.gpi preinstalled in the device in the same folder works fine and is recognized in About window.
What could be the problem?

**michaeloli** · 21st April 2019, 04:23 AM

YasenPepper
I have a DriveSmart 61 with fw ver. 6.00 too.I have 2 or 3 Cyclops update in a week.Use GarminExpress for update,not wifi update.Look for a Gas station,Hotel,if your find it Cyclops mas work.