Thread: kenwood dnx9260bt mass storage deleted

Everything you do, you do so at your own responsibility.
I am not responsible for yours errors, mistakes and damage created and ......

This is continuing discussion from the post #71 and #73 ..............

Spoiler: +

I fired two wires apart and I remounted everything back.
[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

The next step after reset Kenwood DNX9260BT I put together the 2 wires for pre-boot mode and connect to PC via USB.

[Only registered and activated users can see links. ]

We have to do updates with the software to version "dnx7x60_9x60_380" without "pk_files66.zip" with Updater.exe

[Only registered and activated users can see links. ]

1.[Only registered and activated users can see links. ] 2.[Only registered and activated users can see links. ] 3.[Only registered and activated users can see links. ]

4.[Only registered and activated users can see links. ] 5.[Only registered and activated users can see links. ] 6.[Only registered and activated users can see links. ] 7.[Only registered and activated users can see links. ]


After finishing firmware update I disconnected the two wires for pre-boot mode and I have isolated separately and we left out for any eventuality.
Disconnect from PC and we need to reset Kenwood DNX9260BT.

Then I redesigned settings and started the Garmin normal.
But it is not fully functional The longer it takes only one step.

1.[Only registered and activated users can see links. ] 2.[Only registered and activated users can see links. ] 3.[Only registered and activated users can see links. ]

Now the last step.
On an SD card formatted in FAT32 with RMPrepUSB.

[Only registered and activated users can see links. ]


1.[Only registered and activated users can see links. ] 2.[Only registered and activated users can see links. ]

3.[Only registered and activated users can see links. ] 4.[Only registered and activated users can see links. ]

I put firmware update DNX7x60_9X60_431 original and unchanged.
SD:\Garmin\GUPDATE.GCD

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]

We need to reset Kenwood DNX9260BT
I put SD card in card reader from Kenwood DNX9260BT.
The update went well by SD card reader, Garmin has become normal and functional.

[Only registered and activated users can see links. ]

So we saved between 250 and 650 euros and I'm very happy.
Thanks to everyone who gave me the information, applications and ...... more.

P.S. do not use Garmin Cyclops, leading to reset Garmin application.

Everything you do, you do so at your own responsibility.
I am not responsible for yours errors, mistakes and damage created and ......

I did everything on my own responsibility.
I did not have what to lose.
I risked and ..... I won.
To me it functioned.

[Only registered and activated users can see links. ][Only registered and activated users can see links. ]
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

Originally Posted by mylona79

hello orak, exactly how do we enter preboot ?after resseting and whilst the kenwood is powered on then we connect those 2 wires? how will we understand thats the preboot on ?

hello mylona79, in pre-boot mode you will see this :

Spoiler: image

[Only registered and activated users can see links. ]

I confirm it works , many thanks ORAK !!!