Thanks for the reply Dani. Unfortunately you're correct, that's not the file that i want. What you've attached is the boot bin from your gupdate.gcd. I'm wanting the logo bin which isn't usually in the GCD file. but we can get it by copying the unit's region 16.

I'm still not sure if (i) you if you edited the images in your original logo bin and flashed it back, or (ii) you edited mine and flashed it.

If it was (i) that you did as i hope, i'd like to get a copy of it if possible. Kindly compress your logo bin to a zip or rar file and then upload it here as an attachment.

if you haven't kept a copy, I've made a kit for you to easily take a copy from the 715. Don't be concerned that it might cause any harm. It can't because it will only copy region 16 [the logo region] from your unit to the SD card and it doesn't write anything new to the unit.

Just extract the zip file behind the Spoiler directly to a clean SD card, insert it with the unit off then turn it on. Loading info will appear on the screen and the unit should reboot when it's finished. Some 7xx devices will hang with 'parsing reboot' on the screen. If it does, just remove the SD from the slot and force the unit off by holding the power button to the left until it turns off or reboots.
Spoiler:
[Only registered and activated users can see links. ]


A new file, named 16.bin, will be in the SD root below the Garmin folder.

There's no hurry at all for this. I'm away at present as smokefree kindly posted to advise and i won't have access to the PC to examine your logo bin for a few days anyway.