Nuvi 2x5W Software Versions Summary

**Neil** · 10th January 2015, 10:08 PM

Yes, here's v6.4 ldr.bin: [Only registered and activated users can see links. ]

PS: Although better to use the same version as on the unit for total safety, i've never had a problem using a later version's boot component for that task though. It's quite likely to be a concern if you use an earlier boot/ldr bin to try loading a later [i.e. larger] fw_all.bin though.

**wogeboy** · 11th January 2015, 05:51 AM

Greetings.. Have an older 265wt that my wife used to use when we were dating... Was thinking about trying to add lane assist to this but not sure what procedure is involved. any sticky or write up on best way to try this?
I have read a few articles about flashing with newer 465t firmware 420gcd etc.. but they didn't go into details or procedure..Any help in right direction appreciated.
THX

**isg** · 11th January 2015, 03:13 PM

Originally Posted by Neil

Yes, here's v6.4 ldr.bin: [Only registered and activated users can see links. ]

PS: Although better to use the same version as on the unit for total safety, i've never had a problem using a later version's boot component for that task though. It's quite likely to be a concern if you use an earlier boot/ldr bin to try loading a later [i.e. larger] fw_all.bin though.

@Neil
Would you be so kind to upload 6.40 /the whole FW/ in order to flash it as the last attempt prior to declare the unit dead?
All other attempts - loading higher or lower version of FW, cure FW, SD card commands (thank you Loly) failed.

Thread: Nuvi 2x5W Software Versions Summary

Thread Tools

Display

Hybrid View

Advertissements

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions