Quote Originally Posted by AlexWhiter View Post

If the parameters are not specified, MapSeries would be set to 36, and DrawOrder to 24.

The archive is available from the same link in the first post.
Really thank you for this problem to pay, I do change DRAWORDER varying parameters , but still can not display the road .
Also made of different vector map in Montana650t tested and found jnx2img there are a few tips :
1 - Use GARMIN official produced NT version 20 meters
Contour map , no matter how parameters change , or only show attractions, road names, while the contour lines and roads are covered by the same can not be displayed

2 - If you use GARMIN official produced without contours NT version of the map , coupled with cGPSmapper produced 10 m contour line , if not change the parameters , in addition to display spots, road names , but also show contour lines, but the road can not be displayed or be covered .
[Only registered and activated users can see links. ]

3 - If the GARMIN official produced without using contour NT version of the map , and with the MPC do OF version with contour map share (gmapdem.img), in addition to display spots, road names , but also show contour lines , but the road is still to be covered can not be displayed on the screen of the terrain was gone.
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

In addition, I do use MPCv8.3 DEM topographic maps (gmapdem.img), found that NT version and edition of the difference OF question is as follows:
1 - MPC do I use an NT version with 20 m contour DEM topographic maps (gmapdem.img), because the check "Create Nt Product", to make the results of vector topographic maps (gmapdem.img), with GARMIN official contour map produced without sharing will cover all of the maps are on the map of attractions, street names , road .. and so can not be displayed , only the contours and topography , and to set their own interest only. As shown
[Only registered and activated users can see links. ]

2 - I re-do a version with 20 m OF contour DEM topographic maps (gmapdem.img), other settings are the same parameters , do not select "Create Nt Product", produced with free GARMIN official contour map sharing results attractions, street names , road .. etc. can be displayed properly.
[Only registered and activated users can see links. ]