Thread: Cyclop Safety Cameras for Garmin

Cyclops is beeps only no voice.
Cyclops does not show as an Icon on Map.
You need to do a simulation past the cameras and it will alert you.
Check in settings device about Extras and Safety Cameras to see if it is listed.
If it is listed it will work.

They are listed under "Extras and Safety Cameras" but they don't work (they are also enabled in the proximity alert menu) !!!
I tried with a route simulation and "real navigation" but they don't show up (i tried with both a fixed and a mobile velox).


EDIT: I found the problem....this crappy velox by garmin are far less reliable than any database i've ever used and many of the mobile velox in italy don't show up (i tried one in milan and it worked).
Problem Solved.

Actually Cyclops is a very good database, It is based on the database provided by the Camera Installers and to a lesser degree on user reports.
Cyclops is also a directional database and it only alerts in the correct direction. It also uses POI Corridors to warn you of moveable cameras.
Judging by South Africa database it is almost 100% correct.
When using Cyclops it is better to switch off home-made GPI files as there can be interference if the points are close together.

Speedcameras are not included in France Cyclops , dangerous points only are allowed.

The substitution of concepts is very popular in France now. But Speedcamera is Speedcamera if it is named dangerous point...