Speedcam.txt in the speedcam folder ?
Installed Pongo Skin ?
Speedcam.txt in the speedcam folder ?
Installed Pongo Skin ?




IMO all Nextgen works perfect with SpeedcamText.txt in primary Content/Speedcam/
! with Pongo-Skin for display/visibility on Map need entry in SYS.txt:
-------
[autorad]
disabled=1
--------
!* bevore insert a new SpeedcamText.txt delete File speedcam.spdb in primary Content, then write iGO a new index
Has anyone noticed a problem with average speed cameras?
It seems to get stuck visually warning about average cameras indefinitely when I pass one, even though the TTS will announce the new road speed if I overspeed there. I.e. I will change roads to a 30 road and the 50 sign with camera and average speed will be "stuck" showing.
I only use this version and are more than 20 days that I'm testing the Average Speed Camera, I can tell you that with Arimi's skin it only work in one way, with the command "max_section_time = xxx", where xxx are the number of seconds that determine the duration of the stretch. In the latest speedcam.zip files by Arimi the various commands of the Speedcam categories can be found in ux / speedcam / plugin.ini, and the max_section_time is set to 100 seconds.
When you find a starting point, after a few seconds you have the TTS voice alert, (only after the start and not 500 meters before), for 100 seconds you have the window at the top with the written warning, at the bottom left the Average Speed Camera icon appears with even your average speed, (the writing is very small,almost can not be seen).
Spoiler: image
With the Pongo skin, in addition to working with max_section_time, (by default it is set this way), it also works with the starting points and the related end points of that section. Both points must have the same TYPE, (4), the starting point must have the speed limit and the end point must have speed 0.
You have to delete the line max_section_time and the stroke it is determined only by the coordinates of the start and end points.
The screen is better than the Arimi skin, the average speed is more visible.
Spoiler: image
Still neither system is perfect, with Arimi, if during the stretch there is another type of warning, like High Accident Zone, it interrupts the calculation of the average speed, but as soon as the warning is over the calculation starts again, with Pongo instead the calculation is interrupted and no longer resumes.......
This is what happens for now.... but the work is not finished yet, I'm continuing to do the tests .....
Last edited by BIRBANTE; 28th January 2019 at 09:37 PM.
Hello-HELP ME PLEASE!!!!
I got a black screen after upgrading the system
I tried to give dpi =" auto" or dpi=440 instead of the command "Screen_xy =" auto
Does not change the black screen Do you have another answer?
The device is XIAOMI MI8 128GB
Thanks in advance
weint




after Firmware-Upgrade many Nextgen never or never correct working
i write in a other german Board:
User-Question:
Xiaomi Mi Mix 2S; since the update to Miu 10.2 Nextgen is dead
my Answer:
a Basar 27-734842 [Only registered and activated users can see links. ]; works with Wetter-online under Pongo-Skin. a World 27-702387 [Only registered and activated users can see links. ] works a litte with Pongo-Skin.
Disadvantage of both Nextgen: no Truck-attributes, no matter which Data.zip and/or Skin
a 4Africa with/without Pongo-Skin remains hanging when shut down (Redmi S2) and can only be closed via System -> [Force Exit]
I tinkered a bit
° an old Israel still found 27-658108 [Only registered and activated users can see links. ]; that went so high that she reported 'SDCard / iGO not found'
° next installed a NG-Israel 27-681611 [Only registered and activated users can see links. ]:! * Miracle *! NG Israel works as usual! also weather online with Pongo
* a User-Feedback:
"Thank you, your tip is gold value, now it is again."
REM: all Builds/Basic with german Lang/Voice by @Titanic52 and the SYS.txt with path to secondary-Content on my SdCard/addons/
HTH !??![]()
Last edited by rondoan; 30th January 2019 at 02:06 PM.
Boki_Srb
Is there any solution in the near future?
weint
I am using it stock with no skin and don't really want to use one. Skins can introduce other issues so I think it should work find without a skin.Has anyone noticed a problem with average speed cameras?
It seems to get stuck visually warning about average cameras indefinitely when I pass one, even though the TTS will announce the new road speed if I overspeed there. I.e. I will change roads to a 30 road and the 50 sign with camera and average speed will be "stuck" showing.
Boki_Srb does this sound familiar? Should I just try a more recent release on a Sticky thread? I think I may find other issues with other releases though..
Thanks
Last edited by gpspassiont; 29th January 2019 at 08:57 PM.
In reality you are already using a skin, without a skin, almost nothing would work.
In the stock version in the skin there is the essential, in the ux folder you should have about forty zip files, in the file speedcam.zip there is almost nothing, there are no icons and the plugin.ini is empty. The program uses icons that are in the data.zip, plus or minus the iGO Primo icons.
It's true that lately they have filled the skins with superfluous things, but through the skins you can have many more features, those that you do not need simply do not activate them from the menu. In Arimi's latest skins you can also choose whether to use the Minimal version or the Full version.
However to solve the problem without changing skin, try to write the max_section_time line in the sys, you should have the category alarms section at the bottom and add the line like this:
; S P E E D C A M - C A T : 3
[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Average Speed Camera"
max_section_time=100
approach_beep_distances=150
approach_beep_spoken_type=speech
approach_beep_speech="Average Speed Camera"
section_beep_distance=250
section_beep_spoken_type=speech
section_beep_speech="Average Speed Camera"
overspeed_spoken_type=none
overspeed_sound="none"
skin_first_sound="Section_Start"
skin_speed_sound_delay=250
skin_repeat_sound="Section_Start"
skin_repeat_distance=250
skin_off_sound="speedcam_off"
min_frc=-1
use_road_speedlimit=0
100 it's the number of seconds you want to make the average speed control last.
Usually we have to delete the save folder to activate the change to the sys, but I do not know if it is necessary in this case too, otherwise, change it to the plugin.ini which is in the speedcam.zip/ux/speedcam. It should be empty so just write:
[warning]
max_section_time=100
By changing the speedcam.zip file you do not need to delete anything.
Bookmarks