Thread: Skin IGO NextGen LUNA by Pongo (DISCUSSION)

Lufop
2.2174,48.63431,4,0,1,105, start
2.25599,48.62867,4,0,1,125, finish
2.257213,48.628464,4,0,1,310, start
2.218296,48.634582,4,0,1,285, finish
OSC
2.21755,48.63433,4,110,1,103, start
2.256623,48.628401,4,5,1,120, finish
2.25694,48.628529,4,110,1,309, start
2.217895,48.634608,4,5,1,285, finish

Lufop users always receive a notification about the start of the average speed because they don't differentiate between them. For modern skins, a finish speed of 5 km/h is sufficient.

Yes, the file name and folder name must be identical.

speedcam_mod_eur_3dfv12.zip
plugin.ini — ux\speedcam_mod_eur_3dfv12

If the names don't match, the UX plugin won't work.
EUR + speedcam_mod - Mod AF have already been fixed. It's strange that the error was only discovered now. It started with EUR + 3df v2, and no one reported it. It's likely the downloaded files weren't used for their intended purpose. Your situation is understandable: you use two navigators and want to use the same encoding.

Hi Andrey,

Sorry, but I think I found a bug in the Pongo Luna skin :

Please look at this scenario :

Spoiler: +

[Only registered and activated users can see links. ]

I'm driving fast on a straight line, but I know I will turn right before the speedcam. As I'm faster than the excessive speed of 30km/h, at the white star position I click on the speedcam icon to shut it down.
Then I turn right, right again, but as I cannot see the car of my friend front of his house, I decide to continue my trip, and turn right 2 times more to and now I will pass in front of the radar.

In that specific scenario, the speedcam is announced, the overspeed is detected, the speedcam speedlimit is displayed, but the speedcam icon with the distance is no more displayed.
On another speedcam, the distance icon will appear again. But on the first speedcam, it will never appear again (until iGo is rebooted).
To appear again, the only solution is to redo the same action on another speedcam of the same type.

This bug is present also for light camera (I didn't test the other "normal" camera type).

For section camera, the bug is also present if you cancel it during the OnSection and if the end of section is never detected. When the end of section is detected, the bug is cleared.

I tested the Wal24 skin with the same Luna core, and the bug is not present. But Wal24 is displaying all information on 1 icon, and not on 2 like Pongo is doing (speed + distance/type).

I tested Pongo with different skin dates (2024 + 2024 + 2025), and the result is the same. I tested also with mod EUR or mod VB : same result.
Sound it's somewhere in data.zip.

The distance of the alert, in a straight line, is enough meters for the alert, but after leaving the adjacent street, there are not enough meters. Plugin.ini settings for the distance, specify a second alert of 50 meters and a first alert of 100 meters. And also, alerts with a route are different from alerts without a route. Perfect alerts using a route, all the dangers on the road are included in the route you are following.