Thread: Skin iGO nextgen by pongo (DISCUSSION)

Graduated with medium speed cameras, now these cameras are voiced as the manufacturer planned and even more))), for one corrected warnings about speeding up, there were moments when duplicated

In more detail about the cameras of average speed

for the correct warning, for the medium speed control zone, there are two possible methods of counting:

1- there must be two chambers:
- the first (the beginning of the zone) with the measured limit of restriction, for example 70 km / h
- the second (end of the zone) with a speed limit of 5 km / h or 0km / hour ,
both cameras are directed against traffic;

2- there must be one camera in any direction and an entry in speedcam_category
[speedcam_category: 3]
max_section_time = 180; is the warning time

It is possible to use both methods together, with the exception that, with max_section_time entries, the end of the zone will be farther from the second camera, otherwise the second camera will start warning about the control zone with a limit of 5km / hour or 0km / hour


when using this speedcam.zip there should not be any records about the cameras [speedcam_category: 0 - 31] and [warning] in sys.txt, since all the necessary entries are already present in the plugin.ini , you can only change the time in the record ---> max_section_time = 180, or completely delete this entry if you use only the first method is warned ii

Thanks pongo.

speedcam.zip
&
the_skin_by_pongo.zip

L.E. - with possibility to disabled speed units in the "Speed ​​Limit"

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]