Thread: Truck support in NG versions

Look at post 38, 43, 45 and 51 from Wojpen.

Truck does work, but you don't get the warn signs for height and other truck signs osiris4isis mentioned in post 33 ( on the side of the screen you don't get the height icon or every other one ).

Only warning you get is the big screen warning like in my post 45, that's real life route.( same thing as the bookworm has )
On route calculating you don.t get any warning at all, but when you take a look at the route profile, you can see he's taking another route to avoid tunnels etc, according to the setting in truck profile.

Only thing i have is that i dont have fully map coverage in the Netherlands, there are several tunnels with warnings, but there are at least 2 tunnels wich the program or map don't work.
I tested with Here Q1 and Q2 2017 maps.
The Heinenoord tunnel on the A29 Highway can't be passed with 4,5m height, i have set 4,5m in my profile, but i don't get any warning at all, not in calculating, not in route summary, not in real life.

Like i said before, truck is working, but without the signs, only the Warnings, thing is, when you get the warning there's no turning back in real life, and you do have a problem.
The route calculating is taking routes depend on you're profile, so normally you don't get to see the warning, because the planned route is not sending you through the tunnel.

When you look at my post 45, there's a tunnel ahead with height limit of 4,30m, my profile is set at 4,5m, just to test.
Route Calculation was taking me over the nearby bridge there a 2 exits before entering the tunnel, he guided me to take the 1st exit ( 1st picture ) wich i ignored, the program recalculated and wanted me to take the second exit, then i drove by the second exit and there's no turning back anymore, than i got the warning as showed, big screen says i can't pass the tunnel.

Thanks everyone for looking into this, and all input is welcome. grtz. Ludo.

I've looked again to the signs osiris4isis mentioned in post 33, and i think the bookworm might be right, i never seen this signs on the left, now i'm curious if he see's signs for weight and height on the same place.

He mentioned the big warnings, those are the ones Wojpen and i have post before.
But how comes when he set his profile to 5,5m the underpass the bridge there was no hight limit sign on the left of his screen, only the big warning, with accept or decline.

I wandering if at the program was able to find another route, i guess not.... to close to the bridge.
So when you hit accept you'll have to drive under the bridge and you get stuck......
So when you hit Decline the program throw's away the entire route and leave you behind standing in front of the bridge......
Bin there a couple of times with the accept or decline warning, when you see this one, you're on you're own....

I do think you're both are right according the working of the program or where the information is taking from, map, ftr, da, or program files.

I drive with truck profile for a long time and those Warnings where there from the beginning, so nothing new here.

When first truck navi's where on the market only thing what was mentioned always was, beware no full truck coverage for different countries.
And that has not changed, i can't rely on a full truck coverage map, and i don't think it has anything to do with the program itself.
The program is working as it should, it calculates other routes, it show's roadsigns acoording to the bookworm, and we do get Warning signs(Big Screen)
only thing missing is full map coverage for all truck attibutes, and that should be in the FTR files ?? like with the route i mentioned, no warning for the tunnel.

Everyone be free to reply or ask questions, happy to know we have The Bookworm on here too to test and change information with us.

grtz. Ludo