Thread: Problems with TTS and speedcams

Check settings, sound option and make sure that voice [audio] is enabled.

Originally Posted by osiris4isis

1. Yes. For iGO/Primo/NextGen.
2. If you're using audio, you have to use mod/hack/skin that support ability to add audio. If you're using TTS, you have to use mod/hack/skin that support ability to add TTS. Once you've tested audio/TTS working, then you can add ability for speedcam using audio or TTS. You should not need to change anything in sys.txt but you might have to turn it on inside proggy.

Thank you, that's all I want to know.

Originally Posted by Boki_Srb

I think the user did not knows the difference between TTS and standard voices. Nor any basis of iGO.
Otherwise, he would read the guidelines in both topics (one is a sticky and essential) that I have pointed out to him.

@kikiupload:
Probably you will find it easier in your mother tongue. I recommend you visit red-gsm.net forum.

I knew there are two versions, TTS and standard voice. I didn't know if it possible with both versions, and which method is easier.
I know you want good, but your approach is different, unlike @osris4isis or @Phildu91.

They answered me with tips how to start and what exactly need to done about my question. And thank you guys so much!

Hi Osiris4isis.

I am trying to set speedcam warnings with this iGO AVICSYNC 9.18.28.696728 (no skins, only original ux set).
My plan is:
1- tts warning ALWAYS announce alert point TYPE, DISTANCE AND SPEED, REPEAT after 30 seconds
2- beep wav "X" CONTINUOUS when aproaching alert point
3- beep wav "Y" CONTINUOUS when overspeed the alert point aproaching
4- tts warning when overspeed the alert point aproaching, repeating TYPE, DISTANCE AND SPEED after 10 seconds

my sys.txt:

[warning]
is_spoken=1
is_sound=1
overspeed_min_speech_repeat_delay=10
overspeed_min_tone_repeat_delay=10
say_camera_distance=1
say_camera_speed_limit=1
speedcam_continuous_approach_beep_when_tonal=0
speedcam_enabled=1
speedcam_warning=1
warn_distances="130:1000,90:790,70:690,50:590,30:540"

skip_approach_beep=0
speedlimit_warning=1 ;(1)
speedlimit_warning_voice=1 ;(1)
speedlimit_warning_visual=1 ;(1)
speedcam_uses_priority=1
speedwarn_delay_between_warning=30 ;(30)
speedcam_need_approach_beep_on_section_cameras=1 ;(0)
speedcam_maxdistance_from_road=50 ;(50)
speedwarn_alt_tolerance=100
speedwarn_tolerance=100
speedcam_need_approach_beep_on_section_cameras=1
speedcam_visualtype=1 ;for all cams?
speedcam_soundtype=2 ;for all cams?

;speed camera
speedcam_visualtype_0=1 ;0=none 1=visual+sound 2=visual
speedcam_soundtype_0=2 ;0=none 1=too fast 2=approach

Result: only beeps when aproach, no tts

Any idea how to fix this WITHOUT skins ?

Thanks