Once more for the Unbelievers or just for you guys

Instructions to generate software unlock code using GMPC:
------------------------------------------------------

1. Download and install Garmin Mobile PC.

2. Launch GMPC, when asked "Did this purchase of Garmin Mobile PC include a Garmin GPS Receiver?" click "Yes".

3. When asked to Connect or power on your Garmin GPS receiver, click "Done".

4. Click "Skip" while scanning for GPS receiver and confirm "Yes" on "Are you sure..." message box.

5. Go to Settings -> About and make a note of your "Device ID". (ID of SD Card inserted in Card reader)

6. Launch the keygen and type in your "Device ID" into the "Unit ID" field.

7. Select "Garmin Mobile PC" in Software Product drop-down box and hit Generate button.

8. Copy (CTRL+C) your generated device unlock key to the clipboard.

9. Now open the Notepad and paste (CTRL+V) the key and save the file as SW.UNL

10. Put your newly created file to your GMPC installation directory (C:GarminMobilePC by default) and restart GMPC.

The SW.UNL can also be used as unlock file in any Garmin GPS not only in GMPC

NOTE: If you managed to start this software in Trial Mode, you won't see any "Device ID" in your Settings -> About page.
You will find a kind of "Software Unit ID" instead and you CANNOT GENERATE an unlock code for it!!!
If this is your case, close down GMPC, then go to C:Documents and Settings\Application DataGarminGarminMobilePC
and delete its content. The proceed from Step 2.

This will work, believe it or not