Thread: Zumo 590/595 Boot Logo

Thanks Butters.

> "boot.bin" (which i'm assuming you meant by "boot.ini")

I did mean, boot.bin, sorry!

> Some devices allow a change of splash screen image from within the device's setting menu

Earlier Zumos did, the 590/595 doesn't

> if the device has been cross-flashed there is sometimes no way for the device to load from region 16 on boot-up.

If I flash a Garmin Zumo 590 with the 595 firmware, it still displays the standard Garmin boot logo, so I suspect that even with the 595 firmware, it still loads from region 16 if that's where the Logo is. Only with the HD 590 does it change to the small error message after flashing. (The HD Zumo 590 and the Garmin Zumo 590 have the same HW ID.)

> So have you tried with either HD 590 or zumo 595 or both to dump rgn16 with Ldr.bin and 'rrgn' text command and then examining the dump in GIR_Editor? It may be that the
> HD logo data still contained in rgn16 is incompatible with the zumo 595 firmware and so no image is displayed. Some conversions such as nuvi 37x0 to 34x0 also require a change
> of logo, so that problem isn't without precedent.

That sounds possible! But you are dealing with a stupid newbie here! :-) Can you tell me how to dump rgn16 with Ldr.bin and 'rrgn' text command, please? When I load the .GCD file into the RGN Tool, I don't see that region.

Spoiler: Image

[Only registered and activated users can see links. ]