Thread: Zumo 590/595 Boot Logo

Yes, no problem. You need a clean MicroSD card. Extract the attached zip file to it. After extraction to the card, the root directory should contain 16.bin (the logo file) and the Garmin folder only. Ensure the Zumo 595 is fully off, and insert the microSD card, then turn the Zumo on. [if battery is not well-charged, connect to a charging source not PC USB port and it will turn itself on]. 'Loader' should appear on the screen then it will reboot once it's finishing copying and flashing and you should see the HD start-up logo.

Credit to those who detailed the procedure, especially leading to Neil's post here: [Only registered and activated users can see links. ]

Note that what I've sent is only to place the HD logo on a Zumo 590 with 595 firmware, HW ID 2436, and must not be used on any other device! I accept no responsiblity for this going wrong, and it's done at your own risk! (I'm sure it will be fine though - I've done several now with no problems at all!)

Let me know how you get on.

Hello.
I apologize for the delay, but the pandemic caused several problems, including problems with a repair on my ZUMO 590/595.

I followed all the directions and it worked.
I thank. It was very kind of you to share your time.
Again, thank you.