GarminCure3 tool - the new way to create cure firmwares for Garmin devices

**kunix** · 8th December 2012, 01:21 PM

It's not enough to format to FAT32 with Garmin name. I'm serious, FAT32 filesystems are different, and sometimes Garmin devices don't understand FAT32 filesystem. Use RMPREPUSB as suggested here: [Only registered and activated users can see links. ]
GarminCure3 can't break the pre-boot mode on nuvi 12xx, as it doesn't patch boot.bin, so you're doing something wrong.
Try holding the power button for ~30 seconds to turn off the device completely.
Also try pressing the LCD as close to the upper left corner as possible.

**benjorave** · 8th December 2012, 01:52 PM

all right!
The problem was my usb port in pc.... i shutdown my pc and turn off power cable, restart it, and then i can see garmin internal memory.
So i format with RMPREPUSB, flash original firmware, and now i'm using garmin webupdater for language file....

THANKS!!! :D

p.s.: i hate usb port TilT! :D

ciaoooooo!!!

aekhong · 16th December 2012, 11:11 AM

I did mistake with my 3590EU and internal memory had gone.
With cure3 + formatted as post number 1 is a nice method.
3590 is alive again.

jbalbiano · 5th February 2013, 02:29 PM

hi sory im new here but in the screnn system sosftware missing but i try to update the software with the updater and say no update are avalible for this product garmin nuvi 205 fw7.60 i have the gcd file and work whit this program

**dasilvarsa** · 5th February 2013, 02:39 PM

Originally Posted by jbalbiano

hi sory im new here but in the screnn system sosftware missing but i try to update the software with the updater and say no update are avalible for this product garmin nuvi 205 fw7.60 i have the gcd file and work whit this program

I think you have the incorrect gcd file for your nuvi.
There are different Nuvi 205 Models.

jbalbiano · 5th February 2013, 02:47 PM

Originally Posted by dasilvarsa

I think you have the incorrect gcd file for your nuvi.
There are different Nuvi 205 Models.

hi thx for you quikly respond in m nuvi say nuvi 205 can 310 or wich the correct formto see my model of nuvi thx again

**lolypop000** · 5th February 2013, 04:22 PM

Nuvi for EU is in two different FW one normal and one MTK

Here you have original and MTK FW, try with cure tool and one of this fw will work.

[Only registered and activated users can see links. ]

If won't work, then you have SG,TWN or CHN nuvi.

p.s.
If you run webupdater before your nuvi stop working and you update to the last FW and if last FW was v3.10 then you have SG nuvi, becouse SG latest FW for 2x5 is v3.10

[Only registered and activated users can see links. ]

**deividgv** · 19th February 2013, 02:05 PM

Hi! This program can flash my Garmin 1300? My dad set a pin lock on a travel, he doesn't remeber it, and now we can't go to Brazil again. There is another way? Thanks!

**dasilvarsa** · 19th February 2013, 02:53 PM

Originally Posted by deividgv

Hi! This program can flash my Garmin 1300? My dad set a pin lock on a travel, he doesn't remeber it, and now we can't go to Brazil again. There is another way? Thanks!

Start at 0000 ............................................
(Don't tell anybody I told you this (Top Secret))

**kunix** · 19th February 2013, 02:15 PM

deividgv
GarminCure3 doesn't remove GarminLock. But I can help you with that. The only problem is how you're going to prove that it is your device, and a not stolen one. Can you tell me your device's UnitID, take a photo of the device's serial number written on the device itself, and take a few photos of the device's package and in particular the serial number written on it?

Thread: GarminCure3 tool - the new way to create cure firmwares for Garmin devices

Thread Tools

Display

Hybrid View

Advertissements

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions