Thread: Garmin Thailand Street Map v.9.0 (TSM9.0) Thai & Eng

Insert the unlock code with gmaptool into the image.gmaptool -u [unlockcode] gmapsupp.img

Originally Posted by skyearth95

But it cannot joint the unlockcode into gmapsupp.img, i used the "gmaptool -u unlockcode gmapsupp.img ".

You need to use Capital -U instead of -u

Dear catymag,
I understand your point and also how it works with the img files. However, my problem is very much different because I DO NEED a ROUTABLE version incl. ADDRESS SEARCH to be installed in MAPSOURCE. Why? Because my favorite StreetPilot 2720 does not have the option of an SD Card, and if I upload the img file only it is not unlocked...! I can't upload the separate .unl file in any way.
Please any idea?

Dear Catymag,
I did try to remove the old unlock keys with gmaptool but was not successful so far
Regards
Erwin

Dear Catymag,
I tried to make myself a ROUTABLE map from the img file with cGPSMapper Routable v0.92 FULL but what I got was not routable when sendet to the device (all address etc. was gone)
I have no idea what I made wrong
Regards
Erwin

Dear catymag,
I did download only one of them before I tried anything else but it said UNLOCKED. The problem is that I can't use a .unl file to unlock. The unlock for the unit MUST be embedded in the img file. I will try out the other one and see if this one works. I had a chat with a garmin dealer today, and he told me that they use a new tech on the new maps where the unlock have to be WITHIN the file in order to work on the Streetpilot 2720 internal rom...!
On the other hand the file I downloaded from the first page work perfectly on my Nuvi 550 in connection with the .unl file

Thks again catymag for both map + JCV...
my result after upgrade to both TSM 9 & JCV....
TSM 9 working very smooth but i think gps locate my car wrong position as it will show my car below the position im currently at.....
JCV appear sometimes but now it show "pirating copy" and did not try it again, any solution to this problem or because im using 765 that not support yet?

Which firmware are you using? Currently reports suggest that Taiwan & Sing/Mal firmware & Thailand firmware supports TSM JCV. But then again i am not sure as i am on Taiwan's firmware.

If your nuvi unit is from US/EU, simply just change your firmware to Taiwan to save all the trouble.

im using 2.70 fw but not sure which language but my device from TW so im assume neither TW or TH fw, it sure to support JCV but JCV file in this thread from "catymag" shown "pirating copy" from my device so i assume that person unlock JCV not allow to use from other device.......just assume

Originally Posted by tom1807

JCV works only on nuvi215 with Thai Firmware and only for the Thai map.
All other devices, like my 765 gets a picture that this is a pirated copy.
If u own this device, i will upload later.

Just quote this reply from "tom1807" wondering anyone have JCV file for 765 device?
If so please sharing the file for everyone as i cannot use JCV file from "catymag"

Thks in advance

I am also using Nuvi255W with SG/MY V2.70. Downloaded the JCV file together with the TSM V9 Eng (no pain version). I still cannot get JCV function.
Here is what I have done.
1) Copy & rename the TSM V9 download file to gmapsupp.img
2) CopY & rename TSM V9.JCV file to gmapsupp.JCV

These copies are in my SD-card garmin folder.

Is there anything I miss ??

Edit:

Ok..Manage to find out how to enable JCV after playing around with the Thailand Map and JCV file. All i did was to create a JCV folder inside the Garmin folder on My SD card. Thanks for the great map !!!