Thread: CityXplorer maps unlocked to work in Nuvis 37xx series

I think nuvifone supports cityxplorers and you can use fid800 maps in map folder with the .unl code made with JM as explained in post one and in my linked tutorial, i cant explain it better

Originally Posted by woodbill

I know you mean well but w/o EPM it is not CityXplorer !!

Garmin published CXs without EPM too, eg. :

Code:

Please Login or Register to see the links

you can read in coverage:
*Coverage area map shows major roads, highways and points of interest only. Enhanced pedestrian navigation features are not included with cityXplorer Christchurch.

Small CX and CNE must be the same version.
Small CX adds EPM to the existing CNE version, no CNE (same version) = non working CX.

Btw we have a thread for EU CX, this thread is for single modded CXs for 3xxx nuvis and newer , all this discussion here about EU CX is off topic.

@sbog
It will if you de-select the other map. Don't mix versions or types of map covering the same area by selecting them together on your unit. Enable them one at a time only.

Originally Posted by sbog

@Neil
i usually do this way, but i've noticed that if to forget to deselect one map while selecting some other covering the same area - nothing awful occurs: my device gives priority to one of them.

You've got lucky, and mostly it will be ok. But if there is conflicting info and you are in that spot you will have problems. Better not to tempt fate, especially if you are in the middle of a big unknown city or on a busy unfamiliar freeway. A 'nuvi hissy fit' may result and be most inconvenient. Either use the same versions or deselect one.

Originally Posted by ivicseki

Thank you! Will it work on nüvi50?

Very easy to check yourself:

Code:

Please Login or Register to see the links

But I'm in a good mood, so..... Hint: Yes! But not Enhanced Pedestrian Mode.