Thread: City Navigator North America NT 2011.10 3D (20.11) - Win+Mac

[Only registered and activated users can see links. ]
anyway POIs are in this section
[Only registered and activated users can see links. ]
if you want to update a previous CNNAM , before doing anything ,backup your gmapprom on your pc, then rename the new gmapsupp.img unlocked exactly like the old one and copy it in the same position the old one had in your nuvi.
If you have the last firmware perhaps the map will be locked so you must add an gmapprom.unl created with notepad
instructions:
to unlock an unlocked IMG
rename the map gmapprom.img and unlock with jetmouse keygen creating the unl file with notepad
[Only registered and activated users can see links. ]

on jetmouse keygen v1.5 put either the 10 digit gps unit id number (will be unlocked only in your gps)or the sd serial # (it will be unlocked in any gps you put the sd card
under-select map product --on the bottom ---custom map set---add the maps FID# also called mapid #

click generate a few times on the bottom-all those numbers will unlock the map--copy that 25 digit number into the gmapsupp.unl file --- don't add a enter --just 25 digits on the first line ----
on a sd card create a garmin directory--in that directory copy your gmapprom.unl file (unlock file) and the gmapprom.img
When you save the .UNL file in Notepad, be sure you set the "Save as type" to "All Files", not "Text Documents".
copy the unl file in the map folder
for your phone follow this
[Only registered and activated users can see links. ]

Originally Posted by niuhong

why this mapset isn't not availlable for downloading at the Garmin site ?

It is available at Garmin ($ 99.99 USD), look here:

Code:

Please Login or Register to see the links

But anyway, it was available here for free before it was available at Garmin for money.

Originally Posted by silab

hi there
i downloaded the first two links also mentioned in post #61 1.59 gb
now what shall i do to make a one file .img????
thanks in advance

These are 2 parts of RAR archive which should be unpacked with WinRar and then copied in folder to be used with MapSource program (MapSource should be installed - explained in post #1)

If you need IMG file then download unlocked IMG - two files from post #1
Unpack them with WinRar program (extract) and you will have file gmapsupp.img

P.S.
You don't have to post twice, you could press "Edit post" and change whatever you want in your post (one of posts trashed)

Yes
Files you downloaded could be used with MapSource only
Download, unpack with WinRar and copy directly to your device

yes you can but deselect the old one before using it