Post here please your help request regarding Garmin

**catymag** · 18th August 2010, 12:12 AM

have you unlocked Mio with MioPocket ?
some infos [Only registered and activated users can see links. ]

You needs Port Splitter V1.20 and this script (Copy&Paste then put it in Garmin.MSCR!!) to let the Port Splitter starting up at the same time when the prog starting than everythings is Ok :

Code:

Please Login or Register to see the links

credits to
BrGd

port splitter download

Code:

Please Login or Register to see the links

**ncube2** · 18th August 2010, 01:29 AM

yes i have Mio Pocket installed. Only prob is the GPS singnal, i get past the activatio n screens for Garmin and then it just keeps searching for GPS signal and i see no bars on the top either.
Wht do i do with the port splitter, shld i install it under /Garmin by running the .exe - i got this one from the download page, u put in, portsplitter_CE5_setup is this the right one ? When i try to open the .exe it says not a WIN CE app.
Thx for ur help.

**catymag** · 18th August 2010, 02:06 AM

you need also
[Only registered and activated users can see links. ]
unzip CAB and place the dll in the installation dir rather than Windows

**ncube2** · 18th August 2010, 02:12 AM

can u pls explain wht to do with these, sorry am new to this. I have the psce5.CE5_ARM & portsplitter_CE5_setup.exe (i cannot run the exe file on the storage card)
When i unzip the cab file i ve got these 3 files, EXTVSP~1.002/PORTSP~1.001/PSCE5C~1.000.
I have updated the Garmin.mscr with the doc u pasted above.

**catymag** · 18th August 2010, 02:35 AM

sorry I gave you a wrong link, this CAb is for installing portsplitter directly from your phone
you'll find the needed dll to run posrt splitter in win CE here
[Only registered and activated users can see links. ]
under Windows CE some libraries are missing in device.
Most of the available Windows CE- devices are Pocket PC’s and therefore most of the available Windows CE software is written for Pocket PC’s.
Because of the GUI differences there exist also differences in the available system- DLL’s.
They are aygshell.dll, coredll.dll and commctrl.dll. If some of these files are missing in your system, you will got an error message

**klauzja** · 23rd August 2010, 07:52 AM

Just in case anyone has some ideas, on how to convert a US Zumo550 to support Japanese v10 map.

I hope some of the gurus here can offer some ideas/advice.
I have a US Zumo 550, and having just moved to Japan I am trying to make it work with a Japanese Garmin map.
I can load the Jap Map OK, but obviously it just displays as gibberish since the US Zumo can "read" Japanese double byte characters.
I have a "dump" of a friend's Japanese Zumo 550, so I have all the files that come on that version. My assumption was that at the hardware level, the Zumo, like a PC, can support either type of system, as long as it's running the correct firmware.
To test this assumption I've copied over the main (from the Japanese unit) files found in the Garmin folder on the Zumo. With these files in place my logic was to run the Japanese version of the GUPDATE.GCD file (which simply involves copying it to the Zumo, into the Garmin folder). Thus once the unit is restarted the GUPDATE.GCD file should upgrade/change the OS on my US Zumo to Japanese. Btw, this is how the Japanese Zumos get updated, i.e. the user downloads the new firmware file and restarts the unit; the nice Web Update program we can use on the US units is not supported/developed for the Japanese version.

Despite the logic above sounding OK, I'm having difficulties with the execution part, I can see the Loader running, but after a little while the Zumo simply shuts off. I can't figure out what I might be missing to make this process work. (again, I have already copied the Japanese gmapbmap.img, gmappromimg, GarminDevice.xml (updated this file with my ID#), the corresponding .sum files, and everything else to my ex-US Zumo...
I've tried doing a hard reset and pulling the battery, but still get the same result of it not finishing running the Loader.

Would really appreciate any helpful advice.

**trike-man** · 23rd August 2010, 12:34 PM

let me know if you find out have same prob thanks mick

**brinkmanship** · 29th August 2010, 02:11 PM

I've been trying to unlock a mapset using method 3.b mentioned in the guide on this forum. Upon installing the map, mapsource 6.15.11 got installed as well. I ran Map Reverse Converter and successfully reverted my map. I then uninstalled old mapsource + map and installed 6.13.7, to attempt see my converted map, but when I open the old mapsource I keep getting "There is a problem with the MapSource installation. Please re-install MapSource and start it again."

Am I doing something wrong?

**catymag** · 29th August 2010, 02:21 PM

which map?
use mapsetoolkit to uninstall the problematic map-
New maps need new mapsource versions, and to unlock them you need to patch it with jetmouse or [Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]