ActiveRouting .db file - general discussion

Mapperoni · 17th March 2013, 05:28 PM

The problem with multiple db files (only one of them gets loaded) still exists with the latest firmware releases dated 29/30 august.
I checked it myself with v4.40 on my 62s and on forum.garmin.de someone reports the same for the Montana.

The problem is solved for the 62s with the latest firmware v4.80.

**catymag** · 28th October 2013, 12:33 AM

Thanks smokefree, good work!

I copy here screens from Transalpin pro thread to show active routing in gpsmap 62

VURHq

Mapperoni · 2nd November 2013, 08:32 PM

New observations when searching for Named Trails on the Oregon 600.
The maximum amount of Named Trails shown initially for your current position (or given position on Demo mode) is 50.
To find other Trails you'll have to change position.

**bommelb** · 3rd November 2013, 02:43 PM

I think You read this at the Dutch gpsforum in the thread of Topo Pro Netherlands/Benelux.
But it's not a new observation. Using "Where To" and one of the options (Waypoints, Trails, Places, Tracks etc.) always give a maximum amount of 50. Not only for the O600, also my O300 or 60Cx.

Mapperoni · 6th November 2013, 08:26 AM

Basecamp also shows 50 Named Trails at first search.
Not a new observation but good to write down here for others that don't have time to play around with their PC and GPS every day.

Mapperoni · 8th November 2013, 04:46 PM

Older GPSr's like the Dakota and eTrex 20/30 can't show the highlighted roads and footpaths (the borders or dashed lines become red) of Active Routing maps. Some Topo Pro maps contain a separate transparent polyline that contains the (hidden) Traillabels. I really don't understand why Garmin has chosen to hide Trailnames but this can be solved easily by changing the TYP file.

This transparent polyline can also be made visible by assigning a de-centered (transparent in the middle so roads can still be seen) red line (exactly like it's done in Topo France Pro), this red line will make all Named Trails visible in older units and also in Mapsource. You can also use this TYP in modern units but then you'll have both highlighted roads + a red line next to it. If you only want the red line you can change Activity to one that doesn't use Active Routing.

For examples and typ files take a look here:

Topo Nederland Pro: [Only registered and activated users can see links. ]

Topo Belux Pro: [Only registered and activated users can see links. ]

**airwolfke** · 8th April 2014, 08:57 AM

Hey after reading this tread carefully and tested out my self I have 3 questions:
I have used TOPO France v3 PRO Pc install, from OZboss, post 1

- When searching on "Named Trails" how can you see how long a trail is? I don't see the length, I only get the distance from the location where I zoomed in at.
- When I select a Named Trail, for example: "Le Fond Du Ryonval" then I select, "create route from Named Trail", there has been a trail made under "My Collection" but it's not the complete route, it's shorter or it's different. Same thing with route "Le Maresquay" to give another example. In the screenshot below you can see that the route is not a looped version, while the orginal trail is a loop, and also much bigger. I never get the exact Named Trail as a route. How come? And yes, the activity is indicating: "Walking"
- How can I get "Named Trails" for bicycling? I have selected activity Bicycling and then went to "Find" --> "Named Trails". I only get the Named trails for walking! Nothing to find for biking. You can also see the screenshot below for an example, none bicycle trails, always same result.

BTW, I'm using Basecamp 4.2.5

thanks,

[Only registered and activated users can see links. ]

**smokefree** · 9th April 2014, 08:48 PM

Since your location shows "Belgium", I assume you understand Dutch. Have a look at this instruction video. Although it deals with topo Germany v6 PRO, the same principle applies to any other Garmin topo PRO map which supports ActiveRouting:

Originally Posted by catymag

Your post unfortunately is missing, we had a server migration and some posts are missing, sorry

Hereby reposted.

**zuma_nl** · 20th June 2014, 11:56 PM

I found out that even if the product name in the header has the same name as the file name of the .db file is sometimes doesn't work. See also these messages:
[Only registered and activated users can see links. ]

I used ImgTool to change the product name in the header of the image file. I renamed it with the exact same name (since they were already the same). But it did the trick anyways.