CityXplorer maps unlocked to work in Nuvis 37xx series

Dhake · 28th July 2011, 09:19 AM

Thanks for replying catymag. I've already spend hours pouring through the tutorials and I couldn't find anything specific to my phone. If you intend for me to infer, the sheer amount of tutorials makes it impractical, even with the use of 'search'. And inferring means experimenting, costing even more hours. This is when posting for help is more helpful. If a specific solution for the nuvifone A50 is not available, then a link to something similar or close to it would also be helpful.

**catymag** · 28th July 2011, 10:32 AM

I think nuvifone supports cityxplorers and you can use fid800 maps in map folder with the .unl code made with JM as explained in post one and in my linked tutorial, i cant explain it better

**catymag** · 16th August 2011, 11:07 AM

Originally Posted by woodbill

I know you mean well but w/o EPM it is not CityXplorer !!

Garmin published CXs without EPM too, eg. :

Code:

Please Login or Register to see the links

you can read in coverage:
*Coverage area map shows major roads, highways and points of interest only. Enhanced pedestrian navigation features are not included with cityXplorer Christchurch.

**catymag** · 23rd July 2012, 02:33 PM

Small CX and CNE must be the same version.
Small CX adds EPM to the existing CNE version, no CNE (same version) = non working CX.

**catymag** · 24th July 2012, 10:12 AM

Btw we have a thread for EU CX, this thread is for single modded CXs for 3xxx nuvis and newer , all this discussion here about EU CX is off topic.

**sbog** · 22nd November 2012, 06:39 PM

Originally Posted by catymag

Small CX and CNE must be the same version.
Small CX adds EPM to the existing CNE version, no CNE (same version) = non working CX.

But i hope these bad news are for Small CXs only?
And european Full CXs 2013.20 would fine along with the CNE NTU 2013.30 - f.e.
Am i right?

**Neil** · 22nd November 2012, 10:17 PM

@sbog
It will if you de-select the other map. Don't mix versions or types of map covering the same area by selecting them together on your unit. Enable them one at a time only.

**sbog** · 24th November 2012, 10:36 AM

@Neil
i usually do this way, but i've noticed that if to forget to deselect one map while selecting some other covering the same area - nothing awful occurs: my device gives priority to one of them.

**ivicseki** · 8th December 2012, 10:21 AM

Thank you! Will it work on nüvi50?

**Neil** · 8th December 2012, 10:57 AM

Originally Posted by sbog

@Neil
i usually do this way, but i've noticed that if to forget to deselect one map while selecting some other covering the same area - nothing awful occurs: my device gives priority to one of them.

You've got lucky, and mostly it will be ok. But if there is conflicting info and you are in that spot you will have problems. Better not to tempt fate, especially if you are in the middle of a big unknown city or on a busy unfamiliar freeway. A 'nuvi hissy fit' may result and be most inconvenient. Either use the same versions or deselect one.

Originally Posted by ivicseki

Thank you! Will it work on nüvi50?

Very easy to check yourself:

Code:

Please Login or Register to see the links

But I'm in a good mood, so..... Hint: Yes! But not Enhanced Pedestrian Mode.

Thread: CityXplorer maps unlocked to work in Nuvis 37xx series

Thread Tools

Display

Advertissements

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions