Cyclops™ Safety Cameras for Garmin

**Cnfhbr** · 28th November 2011, 09:16 PM

Originally Posted by pietu

i think it is not possible make tool to change FID all gpi file because offset (target bits) not same place in all files

Are you sure? It is assumed that 5th byte (at address 0x04) shows an offset into any GPI files that are locked by means of GPI Creator.
Next, we use this offset +9 bytes to find the start of MapId (2 bytes swapped), PID (1 byte), RgnID (1 byte) & VenID (1 byte).

Can you give an example which is not subject to this rule?

**catymag** · 30th November 2011, 08:06 AM

pietu have you seen this ?
[Only registered and activated users can see links. ]

**marcoqc** · 1st December 2011, 09:45 PM

Here is an updated version (1.0.0.1) of CyclopSafetyCamera :

x86 version (C# + .net 4.x) : [Only registered and activated users can see links. ]
x64 version (C# + .net 4.x) : [Only registered and activated users can see links. ]

x86 version (C# + .net 3.5) : [Only registered and activated users can see links. ]
x64 version (C# + .net 3.5) : coming soon ...

Corrected :

- multiple save make the file bigger and bigger rather than just overwrite it. (thx too fringe, who found the bug)

Note : by clicking on "Change Id's" you can put whatever you want for all 4 fields (FID, PID, RgnID and VenID) ; was the case for the 1.0.0.0 version too.

As i haven't the right to post links or images, if a moderator can change the three links... would be appreciated.

Cheers

Moderator edit :now these links are dead,see post
[Only registered and activated users can see links. ]

**Cnfhbr** · 2nd December 2011, 11:50 AM

Originally Posted by marcoqc

... was the case for the 1.0.0.0 version too.

Yes, it was, but it doesn't work properly with the x64. Now all right!
Thanks a lot ...

Now you can change the name of this tool with 'CyclopSafetyCamera Tools' to 'Locked POI Patcher' or 'Locked POI Tools', for example.

**rth741** · 6th January 2012, 09:49 PM

Speed cams positions alert in gps are prohibited from 04 of january
in france???

**rob63** · 7th January 2012, 09:26 AM

Garmin has just released new firmware for Nuvi 13xx/14xx and several other Nuvis to disable speed cam alert features in france. Refer to changelog: "Updated to comply with France Safety Camera decree."

**catymag** · 7th January 2012, 12:08 PM

Not only in 13xx 14xx, in 22xx and 23xx too and in 3xxx we got the update by webupdater.

**leofelin** · 10th January 2012, 05:47 PM

Brazil was discussing the same thing (blocking speedcam alerts on GPS). Thankfully, a judge ruled that "if the police can use an electronic device to monitor the driver, the driver is entitled to have an electronic device to help him know he is being monitored".

**Ballebar** · 18th January 2012, 06:29 PM

Originally Posted by mekmek

thank you for information but it would be nice to see TURKEY in the list

We have posted all available products from Garmin premium services of Cyclops™ Safety Cameras. No Turkey yet in their product portfolio and this thread is "only" about Cyclops Safety Cameras.

Code:

Please Login or Register to see the links

You might find other sources by performing a search on the internet. Some sites needs you to register before download.
One Noeman thread here: [Only registered and activated users can see links. ]
Other example here: [Only registered and activated users can see links. ]

Originally Posted by Raven_B

Great sharing

(Spain is missing?) (edit) Overlooked Portugal_Spain...
Remans only below

And how accurate is this list?

Regards,

You will find all the available Cyclops Safety Cameras countries and their files in this thread. I'll guess that accuracy might vary from country to country and the original sources that collects the data. The technique is however special with Cyclops since they use Garmin Content Toolkit and provides POI-data that only gives warnings for the actual direction you're travelling in. Many POI providers gives (false) warnings for POIs that's meant for traffic in the opposite direction.

**Raven_B** · 19th January 2012, 04:59 PM

Originally Posted by Ballebar

You will find all the available Cyclops Safety Cameras countries and their files in this thread. I'll guess that accuracy might vary from country to country and the original sources that collects the data. The technique is however special with Cyclops since they use Garmin Content Toolkit and provides POI-data that only gives warnings for the actual direction you're travelling in. Many POI providers gives (false) warnings for POIs that's meant for traffic in the opposite direction.

Thanks for this info Ballebar.

Yes, it is how fast that the source collect the new date... but I think it is fast... like the updates rolling fast in.
Next step for me is how to learn to use them

Regards,