I never had that file so cant share it but i think the pn6000 unlock would not be extremely difficult to mod for the different resolution
Sent from my Note7 FE - Flames Extinguished edition
Thank you for all firmwares hellrc5
Now I just need link for unlock VDO Dayton:
MS2000, MS2020, PN1000, PN 2050 (320x240) (RAR 59.7 MB)
I never had that file so cant share it but i think the pn6000 unlock would not be extremely difficult to mod for the different resolution
Sent from my Note7 FE - Flames Extinguished edition
Here are all my files related to VDO Dayton:
[Only registered and activated users can see links. ]
UNLOCK:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
These two can unlock many other devices beside VDO Dayton.
[Only registered and activated users can see links. ]
FIRMWARE:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
These are all my original files designed completely by me (unlock part), and should be enough to partially/completely unlock and/or recover any of these devices (with original firmware) if you mess up something.
All instructions could be found in previous posts.
NO THANKS POSTS ALLOWED, NO LIKES NEEDED, ALL MIRRORS APPRECIATED
Hello, this p/w does not work with this zip
Password for all my uploads (if needed): gpspower.net
For which file? Only one is zip and it is without pass.
All others are not zip, then rar files. Use latest WinRar software to unpack
rmprep
thart is pass
I unpacked it without any problems (with TotacCommander, but of course work with the mentioned archiver )
Hello everyone, not been on here for a long time.
So I was gifted a PN4000 from a mate, said he picked it up at a boot sale and although it turned on it wouldŽnt recognise the sd card (the offcial one supplied with the sat nav)
My question is, can the unit be reflashed with its original firmware or is it just a paper weight now ?
Regards.
Last edited by Boki; 17th July 2022 at 09:10 PM. Reason: approved
sd card is for maps only. as long as software boots up it is okay. maps are a bit difficult to come by and outdated anyway. you can install custom software on the device to launch other nav software like igo etc. with recent maps.
Sent from my SM-N986B using Tapatalk
Last edited by Boki; 29th July 2022 at 06:17 AM. Reason: removed excessive quote
Bookmarks