VDO PN 6000 Unlock

**baistan** · 16th October 2017, 09:28 PM

Please i need original firmware for VDO PN3000 . After unlocked device worked fine untill i try to start IGO i mess something and now is bricked and won't start.

**Midnight Blues** · 18th October 2017, 06:08 PM

Here it is:

[Only registered and activated users can see links. ] (unRAR, unZIP and copy to SD, restart device)

Good luck!

And here are my original completely automatic unlock and install SD (1GB) with iGO 8, Primo (all devices) and Garmin (only 480x272):

[Only registered and activated users can see links. ] (RAR 59.7 MB)

[Only registered and activated users can see links. ] (RAR 133 MB)

This is for checking actual model, screen calibration, ...

[Only registered and activated users can see links. ]

1. Run VDO Service, check model, calibrate screen
2. Install firmware
3. Unlock and install navigation

If anything goes wrong, go back to 1.

Only thing I do remember about unlock SD is that you can use them as "demo" and also do actual installation.
Everything is done with menus.
I do not have devices to test it again, but it was actually tested on all devices.

Good luck!

**baistan** · 19th October 2017, 05:13 PM

Thanks i will keep those files like my eyes

I already try above steps but it seems that my problem is more deep navigation won't react on sd card after plug in and reset device , it simply stays on loading screen and do nothing . I also cannot see device on my pc . And power button simlpy cannot turn device off .
I think maybe some part from bootloader is missing or corrupted.
Around me there are no service centers so i must try to repair by my self and i'm open to any ideas how to access to internal flash or some force update methods even those with risk to finish with dead device.
Thanks in advance for everyone who can give me some advices how to proceed.

**Midnight Blues** · 19th October 2017, 05:21 PM

Take battery out, wait 5 minutes, put in SD with firmware, put back battery, turn on and "pray"

That always recovered device if problem was in software (any kind).
But it could not solve hardware problems.

Good luck!

All these devices are known for overheating in work.
I have one PN4000 and one PN6000 with defective memory, waiting to end up in trash (and soon they will).
No help for them.

**hellrc5** · 12th November 2017, 12:44 PM

Firmaware for vdo dayton pn 3010, this was the last one:

[Only registered and activated users can see links. ]

**thecurse** · 14th May 2018, 10:36 AM

hi there.
i have here Pn6000 here.

I have done everything but the device is not powering.

Can the card be the problem (it`s 4gb)?

**hellrc5** · 14th May 2018, 10:38 AM

It should power up but it does not support sdhc cards and non hc sd cards are extremely rare

Sent from my Note7 FE - Flames Extinguished edition

**meatlove100** · 19th June 2018, 10:43 AM

i have pn6000 freeze on sanbox?

someone answer?

tride every thing nothing works

**Midnight Blues** · 20th August 2018, 07:42 AM

If your VDO Dayton is bricked or freezing any way, re-flash firmware from post [Only registered and activated users can see links. ].

Choose correct firmware for your device.

Links are updated.

**svretena** · 15th February 2019, 12:46 AM

Hi,
Links for VDO Dayton most models are not online any more so please if somebody can upload it again if you have it ?

And original completely automatic unlock for VDO Dayton because link is dead ?
MS2000, MS2020, PN1000, PN 2050 (320x240) (RAR 59.7 MB)

Links for all firmwares need:
VDO MS2000.rar
VDO MS2010.rar
VDO PC5200TSN.rar
VDO PN1000.rar
VDO PN2050.rar
VDO PN3000.rar
VDO PN3010.rar
VDO PN4000.rar
VDO PN4000TSN.rar
VDO PN6000.rar
VDO PN6000TSN.rar

Best regards

Thread: VDO PN 6000 Unlock

Thread Tools

Display

Hybrid View

Advertissements

Bookmarks

Bookmarks

Posting Permissions