Thread: Backup for Navitel MS700

Yes, you can install WindowsCE, but there are setbacks!
Depending on the firmware you will lose some benefits, for example:

• Any firmware you will install on MS700 with WindowsCE will no longer be able to update in Navitel Navigator Update Center.
• If you use [Only registered and activated users can see links. ]) firmware you will lose half of the GPS RAM, ie the MS700 comes with 256 MB RAM (not real) and after upgrading / installing [Only registered and activated users can see links. ]) firmware will get 128 MB RAm (not real).
• If you use [Only registered and activated users can see links. ] firmware, you will have 256 MB of RAM, but you will have problems with the [Only registered and activated users can see links. ].
• You can try [Only registered and activated users can see links. ] available at 4pna.com, but you should check if they are compatible with your hardware.

I still don't know what your CPU is (it has the info behind the PNA, in a tag) but according to the specifications of navitel.com is equal to the E700.

credits: to 4pna.com users

Data from MS700 device:
Processor: MStar MSB2531 800MHz, Cortex A7
OS: Linux
ROM: 8GB
RAM: 256MB DDR3


I downloaded the software from # 23, but when I open the ReadMe file, I see strange stamps instead of text. Do you have any readable file?