Navigon 800x480 for wince6 device

**alazgreg** · 4th March 2015, 01:59 PM

Navigon 800x480 for wince6 device
Requirements:Pna device,400+MHz CPU,128MB RAM (for 64MB i dont know if it works,i dont have such a device to test it)
Resolution:800x480
Software:Navigon PR70 UPG,Version: 7.7.6(build-657)
It is installed in internall storage called "DataFlash" also tested in external storage called "SDMMC"
ATENTION IF IT IS NOT WORKING FOR YOUR DEVICE U MUST EDIT THE PATH FOR YOUR MACHINE

Not recommended for 2din devices many problems reported!!

How to edit:Open folder Navigon/Settings

Edit file ApplicationSettingsPathes.xml

The GPSPort is set to 7,baudrate is set to 57600,to change these settings for your device you must edit the file:UserSettings.default

dowload (without maps)

Code:

Please Login or Register to see the links

torrent:magnet

Code:

Please Login or Register to see the links

torrent file:
[Only registered and activated users can see links. ]

password: alazgreg

you can find maps here:
[Only registered and activated users can see links. ]

A useful tip.
You will have this view if you place the default mapdrawer.nfs file in map folder

If you place MapDrawer_High.nfs in map folder,you have this view

And if you place MapDrawer_XXHigh.nfs in map folder the view is

**nick g** · 18th March 2015, 08:37 AM

Hi!
I would like some help.
I installed this program on a 2din 7 inch china radio.
It starts fine but in a few seconds it say Low battery. system will turn off in 30 seconds and the counter starts until it turns off.
Any ideas?

**alazgreg** · 18th March 2015, 12:42 PM

Open Navigon folder,settings folder,open ApplicationSettings.xml with notepad,delete these lines

Spoiler: pic

**nick g** · 19th March 2015, 07:40 PM

Ok i tried that and it worked!
Thank you!

I can not figure out the com port and baud rate on my china 2 din radio.
Any suggestions?

**alazgreg** · 28th March 2015, 09:56 PM

If your device cant find gps signal after following instructions at the original post you sould open folder "MN Settings" and edit with notepad "usersettings.old" &"usersettings.xml"

removed dead pics

sorry for late response (was away for business)

**nick g** · 31st March 2015, 04:06 PM

Ok i finally got it working!
The only problem is that in Greek language it seems something is wrong with the fonts.
Greek language is showing strange with some characters missing.

**alazgreg** · 31st March 2015, 06:06 PM

As you see my screenshots are using greek language and it shows ok,so the problem is your device is missing arial fonts but there is a solution.
Download attachment,extract,copy content into navigon folder,start with "MobileNavigator.exe".
But first edit "MobileNavigator.mscr" according to your device

[Only registered and activated users can see links. ]

**arq2arq** · 3rd April 2015, 09:23 PM

Thanks for alternative link. I'm testing it now, it's working quite good.
Is there any possibility to remove/turn off Live and TMC options, not needed on non-Navigon PNAs? Especially Live icon in the middle of the menu.

**alazgreg** · 4th April 2015, 11:07 AM

You can disable live services,open navigon folder,open MNSettings folder.

open with notepad UserSettings.old & UserSettings.xml,look for Live section,change values to 0