Thread: Mapmyindia 8.0 with universal enc/dec lic files

@manojmat

Thanks for the software and the easy to follow guide in the OP

I have a chinese Win CE 6.0 GPS and copied the MMIBE folder on the SDMMC card of it per your OP and set the navigation path to the MMI exe file

The software does open up and I am able to access it - 2d maps work, 3d does not, voice works, resolution is WVGA etc all ok

But the biggest problem is that the GPS does not catch GPS signal. Earlier this device had an older version of iGo which used to catch signal, later I installed an updated iGo which did not get the signal, and MMI also does not

I had read earlier that the port of the GPS needs to be changed in .ini file. I am not sure what needs to be changed and where. Please could you guide. I have used exactly the same files as downloaded from your OP except in ordinale.ini I corrected the .cpf filename to india_mi_201211 instead of india_mi_201205 as was given in your ordinale file, I have not changed anything else

For reference this is the ordinale.ini file

[Main]
Brand=MapmyIndia
DefaultTimezone=India Standard Time
SaveTimeZone=1
SafetyWrn=0
Screen=WQVGA

CrashRestartPeriod=5
AutoSaveNavigationRoute=1
SmartSearchKeyboard=1

StreetFontSizeOffset=2

alternate_night_route_color=FF6000C8|FF0000
POIFontSizeOffset=2
demonstration_speed_control=1


MultimapDir=/Storage Card/Mireo PC 3.1/Win_Blackedition/Win_Blackedition/Maps
Map=/Storage Card/Mireo PC 3.1/Win_Blackedition/Win_Blackedition/Maps/india_mi_201211.cpf


[Navigation]
NMEA=

[Advisor]
language=1033
gender=0


[GPS]
Found=

Please if you could guide how to get the device to latch on to GPS signals, thanks