Thread: iGO Speedcam (DISCUSSION)

I saw...

Not to mention that you can replace the codes without any third-party programs. It is enough to open a notebook and replace the codes (edit/replace) in the upper column we put what we are changing, in the lower one to what, something like this.
step by step:
,32, - ,1,
,34, - ,69,
,36, - ,69,
,35, - ,4,
,33, - ,2,

or just
,34, - ,37,
,36, - ,37,
,33, - ,34,
this will be enough, since radar speed and average speed in EUR+ are the same as STD

Yes indeed.........

Sorry, I'm an old man and it becomes difficult to change my habits

I rely on the export of the base - radalerte

rad_txt-iGO-EUR
Radars_de_Feux_Rouges.txt
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
5.699880,43.275840,69,30,1,70
-1.024080,45.624630,69,30,1,332
-1.029250,45.623940,69,30,1,242

rad_txt-iGO-standard
11 - Radars_de_Feux_Rouges.txt
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
5.699880,43.275840,11,30,1,70
-1.024080,45.624630,11,30,1,332
-1.029250,45.623940,11,30,1,242

where 11 code STD changed to 69 EUR+,
and this did not cause any disputes.
But if we look at the skin EUR+, then there the names are given for code 6. In general, this is not so important, I always did it right - Mod AF

I do not correctly explain my problem... please can you read my corrected post #191....... ?

How/where to obtain a full Europe STD speedcam base (in a single file) ?

I uses a tool named convertisseur radars v_10.15 to disptach them in separate countries

If I answered correctly, then of course I understood the problem correctly. And the question is standard, when many ask to change the file from STD to EUR+ and cannot do it themselves. Although it takes 5 minutes

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
or

[Only registered and activated users can see links. ]

Originally Posted by BIBUOT

I uses a tool named convertisseur radars v_10.15 to disptach them in separate countries

[Only registered and activated users can see links. ]

Yes, I have but spyder's file was uploaded the 03 january 2025... Nothing since, nor in february neither in march

Pack IGO_LUNA WAL24
I have a doubt with the speedcam folder inside content, when starting a simulation, when approaching a hidden Radar, the tripod camera icon appears, and the agent's car does not appear, in my case Traffic car,My question is: is this normal or should I remove those xml files?

The first message contains the answer to this question.

FAQ briefly in fact
Radars do not beep and are not notified in the simulation.....