Thread: iGO Speedcam (DISCUSSION)

Not to mention that you can replace the codes without any third-party programs. It is enough to open a notebook and replace the codes (edit/replace) in the upper column we put what we are changing, in the lower one to what, something like this.
step by step:
,32, - ,1,
,34, - ,69,
,36, - ,69,
,35, - ,4,
,33, - ,2,

or just
,34, - ,37,
,36, - ,37,
,33, - ,34,
this will be enough, since radar speed and average speed in EUR+ are the same as STD

Yes indeed.........

Sorry, I'm an old man and it becomes difficult to change my habits

I rely on the export of the base - radalerte

rad_txt-iGO-EUR
Radars_de_Feux_Rouges.txt
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
5.699880,43.275840,69,30,1,70
-1.024080,45.624630,69,30,1,332
-1.029250,45.623940,69,30,1,242

rad_txt-iGO-standard
11 - Radars_de_Feux_Rouges.txt
X,Y,TYPE,SPEED,DIRTYPE,DIRECTION
5.699880,43.275840,11,30,1,70
-1.024080,45.624630,11,30,1,332
-1.029250,45.623940,11,30,1,242

where 11 code STD changed to 69 EUR+,
and this did not cause any disputes.
But if we look at the skin EUR+, then there the names are given for code 6. In general, this is not so important, I always did it right - Mod AF

I do not correctly explain my problem... please can you read my corrected post #191....... ?

How/where to obtain a full Europe STD speedcam base (in a single file) ?

I uses a tool named convertisseur radars v_10.15 to disptach them in separate countries

If I answered correctly, then of course I understood the problem correctly. And the question is standard, when many ask to change the file from STD to EUR+ and cannot do it themselves. Although it takes 5 minutes

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
or

[Only registered and activated users can see links. ]

Originally Posted by BIBUOT

I uses a tool named convertisseur radars v_10.15 to disptach them in separate countries

[Only registered and activated users can see links. ]

Yes, I have but spyder's file was uploaded the 03 january 2025... Nothing since, nor in february neither in march

Pack IGO_LUNA WAL24
I have a doubt with the speedcam folder inside content, when starting a simulation, when approaching a hidden Radar, the tripod camera icon appears, and the agent's car does not appear, in my case Traffic car,My question is: is this normal or should I remove those xml files?

The first message contains the answer to this question.

FAQ briefly in fact
Radars do not beep and are not notified in the simulation.....

You can change codes from column 32-63 to 1-31 if you want, but it doesn't make sense. iGO initially set the coding period with a step of 32.
[Only registered and activated users can see links. ]
I use codes 32-63 in my publications