Thread: AlpineNavi iGO_9.6.30.462695

I wanted to install a newer map IGO, I can not do that, so I downloaded the firmware from the alpine . ru for INE-W970BT-Navitel and it killed my navigation system

[Only registered and activated users can see links. ]

and now I can not go back to the original

sorry but my english is not so good, so I can't exsactly write

It did not hurt, did it I guess that you do something like that.
Well, navitel is different system then iGO. Both works under WinCE and that is only in common. I don't know exact structure of navitel configuration for your device, to compare it with iGO. Maybe even hardware are different (in that case ...you know).
But I can suggest you to try couple of solutions.
First, in cases like this, you have to flash unit with complete original firmware (both main and bluetooth component, then navigation). You can download it from official site (I've already posted link) and try.
If not helps, or can't be done, than you must combine: original firmware files from official site with flasher from Russian site. Cross your fingers and try again.
The last option is to send the mail to Russian colleagues, explain what you did and ask them if can help you.

There is also one "countrified variant", if unit still works:
- on usb stick, put Commander for WinCE. Set device navigation path to it. When you start navigation, actually you will start commander. If necessary, rename the exe to iGO/Primo/MobileNavigator. Than you can see content of internal memory (if is not protected), to know what to do next. After that, you can delete some files, replace, etc... copy complete Primo folder from USB flash to internal memory (again: if not protected)...

Friendly suggestion: For better English translation use for example [Only registered and activated users can see links. ]

And, of course: all you're doing, you're doing at your own risk.
The writer of these lines, and a firmware authors assume no liability for damage caused by your improper use.

Aman...

Originally Posted by Boki_Srb

...
- on usb stick, put Commander for WinCE. Set device navigation path to it. When you start navigation, actually you will start commander. If necessary, rename the exe to iGO/Primo/MobileNavigator. Than you can see content of internal memory (if is not protected), to know what to do next. After that, you can delete some files, replace, etc... copy complete Primo folder from USB flash to internal memory (again: if not protected)...

Do not mess with WinCE environment!

Of course, original navi software works only with original maps. For your device it was Primo 2.0. You have to replace it with patched or other versions. Try, for example, proven version, like Primo 2.4 "Honda" version (9.6.13.405512). Or some Primo 2.0 only for 800x480 resolutions.

Could You send me patched versions of Primo 2.4 "Honda" (9.6.13.405512)? Thank You.

Get it here:
[Only registered and activated users can see links. ]
It is pure software. Download from this forum and put them in appropriate folders, next files of your choice:
- required > language and voice (Polish I guess...), latest global_cfg, map's, poi's...
- optional > buildings, DEM, skin, speedcams, tmc's...
You can also combine it with Alpine data.zip and/or branding.zip (requires sys.txt references or modded sys).