Skin iGO nextgen by pongo (DISCUSSION)

**Texas** · 16th June 2020, 10:33 PM

Does anybody have normal RED CURSOR car model? Not Becker but just like normal iGO only red cursor?

Thx

**modemakias** · 17th June 2020, 02:54 PM

Hello...

@INVESTIGATOR this come from "nearest town" Menu > Settings > Sound > TTS Pro
nearest town you can disable it....

Spoiler: img

@Texas i have red cursor but it come from a "scheme" as the screenshot... if you want it... tell me.

**coukou** · 17th June 2020, 02:44 PM

Hello,
As I wrote [Only registered and activated users can see links. ], I finally managed to adjust the skin to my taste. However, because of COVID19 I tested everything in simulation.
Today, I had the opportunity to test the skin in live… everything works perfectly except for the Alert Point/Sound Approaching beep NO SOUND. And yet, as you can see from the attached image, the setting is OK. In addition I did the test with sys.txt [autorad] / disabled = 1 and disabled = o NO SOUND.

TNX for yr help

Spoiler: picture

**jorgeultra** · 17th June 2020, 05:01 PM

@coukou,

Try to change speedcam_warn to !Alert1
On my device there is no option speedcam_warn.

**coukou** · 18th June 2020, 03:51 PM

Originally Posted by jorgeultra

Try to change speedcam_warn to !Alert1
On my device there is no option speedcam_warn.

TNX
I'll test later when I'll be out

I think, to get speedcam_warn option settings, [autorad] must be disabled=1 isn't it?

**kwbs** · 19th June 2020, 12:41 AM

Originally Posted by coukou

1. I think, to get speedcam_warn option settings

2. [autorad] must be disabled=1 isn't it?

1. In "Read TTS or Audio Speedcam" - Try by changing from TTS to Audio.

2. [autorad] must be disabled=1

3. If it is still wrong and, as @BIRBANTE adviced - You should check the enabling of "Use approaching beep" in all the Alert Types of spcams Selections.

@jorgeultra
For your ears ...

**limovsky** · 18th June 2020, 03:01 PM

Hello everyone

If some one know if this is possible:

I uso Nextegem Israel with Pongo Skin, and the junctionview with FJW files are like the following image:

Spoiler: pic 1

When does not have FJW it shows like this;

Spoiler: pic 2

Normally I like to use the mini junctionview because allow me to see the road and the junctionview at the same time.

What I need to know, if is possible to have a misture of both like the bottom image that I edit on photoshop;

Spoiler: pic 3

The reason, I use a 7" inch android tablet and the direction sign get extremely small on mini junctionview. If I can have both (bigger direction signs) will be great, but I can't figure how to do this or if is possible.

Thanks in advance!

**jorgeultra** · 18th June 2020, 08:38 PM

@limovsky,

The only solution is not to use the fjw file.
There is no possibility of overlapping signposts.

@coukou,

- speedcam_warn - I can't find him and also has no relation to autorad. Are you sure you are using Pongo's data.zip file?

- [autorad] - Who live in France must use the parameter below, this is an old facility. Read here [Only registered and activated users can see links. ]

[autorad]
disabled=1
detect=10

**coukou** · 18th June 2020, 09:00 PM

Originally Posted by jorgeultra

@coukou,

- speedcam_warn - I can't find him and also has no relation to autorad. Are you sure you are using Pongo's data.zip file?

Yes I'm using data.zip file. is dated 16/02/2020, 7225 Kb

**kwbs** · 18th June 2020, 10:13 PM

Originally Posted by jorgeultra

[autorad]
disabled=1
detect=10

Hi jorgeultra

For France etc... it should be:

[autorad]
disabled=0
detect=10

Thread: Skin iGO nextgen by pongo (DISCUSSION)

Thread Tools

Display

Hybrid View

Advertissements

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions