Hi guys, somebody know what I have to do for the speed to appear in red color when is bigger than legal speed value? Thanks
If you read them, then I would not even ask this question. Warnings are not for questions, but because of behavior. You made a mistake in the first post and again made a mistake in the next, even if you were warned
- I edited both your posts to remove unnecessary quotes
- first time also you did not use spoiler, you did not attached images
And, one more rule,which you skipped
10.
n) It is strictly forbidden to discuss the actions of the Staff. If you disagree with the Staff actions , please contact our Admins. The complaint will be investigated.
Better behave cultural and think about your mistakes. You still make them.
Last edited by Boki; 20th July 2018 at 07:00 AM.
Hi guys, somebody know what I have to do for the speed to appear in red color when is bigger than legal speed value? Thanks
Settings-Skin settings-Warning-Speed Limit-Viev Speed full screen (Overspeed) and "Speed Color if overspeed" set to ON
Thanks, i have speed color if overspeed set to on, but not full screen, but it change the color to white, not red to see it better, the white color is almost invisible
Update skin by pongo 21.07.2018
Spoiler: Link
Thanks to pongo.
One of the big news in this update ux proposed by Frontzosd: Hide Side list has been integrated into the Skin even more sophisticated.
We can enable disable the sidelist :
By Press button on Cockpit : Over Current Speed or SpeedLimit: very convenient.
In the Menu: Settings\ Settings Skin \ Cockpit \ Menu Buttons \ Show or Hide the Side List.
From certain Speed that is fixed in the same menu: Settings\ Settings Skin \ Cockpit \ Menu Buttons \ Hide the Side list if speed is higher than:
Thanks Pongo and Frontzosd
Last edited by LouBouha; 22nd July 2018 at 01:22 PM.
GPS: TomTom ONE
Smartphone: THL T11 Android 4.2.2 Resolution 720x1280
Sygic 14.3.4 IGO Primo 9.6.29.636868 Skins : Doupas V9.0h , Dimka/Frontzosd
Hi, after put this latest update on my ux folder, I have no more sound to warning speedcam (non tts), what can i do to works again? Thanks
Hi, without route works start and end of average speed with:
Start: 13.xxxxx,51.xxxxx,4,50,1,115
End: 13.xxxxx,51.xxxxx,4,5,1,115
With active route (the same road) restarts the average speed at the end point.
Is there something wrong with ux Speedcam?
Does Pongo also integrate the selection of frontzosd ( Average Speed ux utility )?
( from Point toll to Point toll )
Last edited by Midnight Blues; 24th July 2018 at 10:54 AM.
NO THANKS POSTS ALLOWED, NO LIKES NEEDED, ALL MIRRORS APPRECIATED
Bookmarks