Quote Originally Posted by victoramas View Post
...
- With both above, iGO 8.3.5. and iGO Primo, I have use the maps iGo HERE Q3 2017.
- I have installed also what you recommended, the “Cserrobi NaviSI Mio Cx20 Flash 1.0” package and is nice. I edited the .ini file to point to the right iGO .exe file and starts fine.
- The iGO was installed on SD card and Cserrobi was installed on Mio C720 flash.
- When I used iGO Primo, then I had to rename the Primo.exe to iGO8.exe, otherwise did not work. Probably more ini settings are needed in order to work with Primo.exe on SD card.
There is only one problem with iGO 8.3.5 on SD card and the Cserrobi, but maybe it has nothing to do with Cserrobi:
- If iGo 8.3.5 is opened and if I press shortly the “shut off” button, which behaves as a “standby” and then I start again, let’s say after some seconds, then the iG0 8.3.5 restarts from beginning.
Sometimes it starts from Cserrobi menu and sometimes from its own menu and sometimes a total reboot.
That is not normal.
- What kind of settings should be changed/altered in order to avoid that re-set when wakes up from standby?
You did not pointed what Primo version are you using?
Primo first edition (8.5.11.xxxx)will be fine for that device, even 1.2 (9.2.1.xxx), maximum is clean and lite Primo 2.0.
- yes, when you use unoriginal software on some device which already had dedicated, you must keep same name
With adapted launchers, you must find proper ini to give different names for packages, and to use different shortcuts
- I don't know about shut/sleep buttons, and re-set, you must ask Cserrobi