Thread: TMC settings for build in TMC tuner Blaupunkt San Diego BP-530

Hello all

So on the BlauPunkt SanDiego BP-530 (Europe) I upgraded (factory delivered version?) iGo Primo from 9.2.4.369294 to v.9.6.13.669160 treated
Nuch nicer interface, and more important, it can read the 2019 maps (the old one somehow could not process the new maps)

The v.9.6.13.669160 works well except it "hangs" when exiting. Solution? Never exit! I removed the exit button and told my cousin to always swap back to the radio by using the radio menu selection.

Just one problem: The new iGo is not seeing the build in TMC tuner. The old one does, so I am sure it is there, but how to activate it.
The old version's sys.txt is nearly empty, hinting that both GPS and TMC are auto-discovered, and while GPS is also auto-discovered on the new iGo, TMC is not.

Does anyone have any suggestions?
- Know what chip & port is in the San Diego BP-530 (europe edition)
- Know how to extract these kind of settings from the original "branding" file?
- Have a working sys.txt?
- etc

BTW: I already tried two pairs of 'blaupunkt related settings I found on the internet.
One was for a [Only registered and activated users can see links. ], but did not work. One turned out to be for external Avanteq TMC on COM7

Original sys.txt

Code:

Please Login or Register to see the links

My current sys.txt (came with the download)

Code:

Please Login or Register to see the links

was a long time with WindowsCE
I remember e.g. Pearl NavGear: it took a long time for a user to crack the Avantec TMC-Driver (DLL). All other attempts with the *Free*-Mobilenavigator iGO-Primo did not run or then without TMC.
I suspect the same thing on the Blaupunkt ???

!!** compare with the package from a data backup

Originally Posted by rondoan

was a long time with WindowsCE
I remember e.g. Pearl NavGear: it took a long time for a user to crack the Avantec TMC-Driver (DLL). All other attempts with the *Free*-Mobilenavigator iGO-Primo did not run or then without TMC.
I suspect the same thing on the Blaupunkt ???

The Navgear Avanteq TMC patch/workaround was one of mine

If I remember correctly, the Avanteq dll, would check the primo.exe version & the CRC of the Branding.zip & would only activate the TMC if these were correct.



@ cybermaus

I don't know the Blaupunkt system so I doubt that the same procedure will work but here it is for you to see.

The download below shows how I achieved this. It requires some hex editor work

[Only registered and activated users can see links. ]

Originally Posted by cybermaus

The v.9.6.13.669160 works well except it "hangs" when exiting. Solution? Never exit! I removed the exit button and told my cousin to always swap back to the radio by using the radio menu selection.

This post requires you to click the "LIKE this post" button and hit F5 to read this content.

Copy my : skinevo_blaupunkt_baros_2.4.zip to ux folder in Balupunkt.