Issues with Binatone U605 and iGo Primo 2.4

**dragandragan** · 26th July 2019, 04:48 PM

Originally Posted by apolyps3

I need to see the full resident flash content, please can upload it to me to see the full resident flash content or upload a backup. Your problem with binatone, also happens on some Ndrive with WinCE 6, could be a DLL or just delete some folder, so I need to see the backup.

I am triyng to attach full content of ResidentFlash size 96Mb here publicly or to your PM but dont know how.

**spyder** · 26th July 2019, 05:58 PM

If Ndrive work, make a backup of Ndrive folder, delete or rename. then rename Mobilenavigator folder and exe to NDrive.

**apolyps3** · 26th July 2019, 06:01 PM

Compress with WinRar and upload to a hosting service:

HOST:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]

**dragandragan** · 26th July 2019, 06:05 PM

Originally Posted by apolyps3

Compress with WinRar and upload to a hosting service:
HOST:

[Only registered and activated users can see links. ]

pass dragandragan
thanx

**dragandragan** · 26th July 2019, 06:13 PM

Originally Posted by spyder

If Ndrive work, make a backup of Ndrive folder, delete or rename. then rename Mobilenavigator folder and exe to NDrive.

Right mate,
NDive which is on ResidentFlash and Primo on SDMMC
What i was able before on binatone U505, is that if i would have another GPS soft on mem card, that would start first.
Is it because that device were on wince 5 dont know.
Don`t want to remove NDrive just in a case if Primo goes crazy and unusable.
That way i have at least working NDrive if needed.

Hope you understand me.

**apolyps3** · 27th July 2019, 12:08 AM

Ok, I send two packs, apply one at a time:
1:For SDMMC(tested in NDrive Kamal 430, NDrive Touch SE XL A4 and XXL A4), the structure is equal.
2:For ResidentFlash(is an simple interface for working with NDrive on ResidentFlash and Primo on SDMMC).

Spoiler: Instructions Pack 1

Spoiler: Instructions Pack 2

I made changes and deleted a folder, just follow the instructions in pack1 and 2.
If you want to later explain your doubts of what I did
Sorry my poor english.

**dragandragan** · 27th July 2019, 05:02 AM

Hello mate,
One huge thank you for your effort and time spent writing the script.
I have tried both Instructions Packs, although Instructions Pack 2 worked like charm.
Number one wold not start it up.

With Instructions Pack 2 there is jus one issue and that is a screen resolution. Its 800x480.
Any way that i could something about it or its needed to be slightly adjusted ie. rewrote.

This is how it looks like.

[Only registered and activated users can see links. ]

Once again, apolyps3 thank you very much.

**costas3850** · 27th July 2019, 04:48 PM

I see on post [Only registered and activated users can see links. ] that you can set path for navi app.
Download from [Only registered and activated users can see links. ] and copy MioAutoRun folder on Flash.
Set path to MioAutoRun\Unlock\Skin\SystemInformation.exe .

Or you can try [Only registered and activated users can see links. ] unlock.
They are made on the same structure as apolyps3 did it.
Then run once Set Path ( the blue arrow at the top right ) to adjust resolution .