Thread: Subaru in-car navi iGO primo

You are posting at wrong forum, sorry.
First, you need to know the exact model of device. If there is no mark outside of the unit, or some identification in the software, detach it from the board and look at the label.
After that, you can ask for help.
From your story, I'd say it's factory system. The problem is that they usually access through specialized ports, or via firmware upgrade from SD card. So, you probably need fully cracked firmware, or a way to put cracked exe in it.
If it does not exist...you know solutions.
Until than, I do not know where you live, but maps from the end of 2013 are still useable. A a pair of missing roads are not a problem, drive and use your eyes and brain
=====================================
You can never get a fresh factory maps in a new car.
The reason of course is simple: you are now projecting the car and its components (GPS too). Making contracts with suppliers. Pass some time before production starts, while all this goes on sale ... pass at least one year (optimistic), or more (2, 3...).
The real problem actually lies in the fact that from the start not foreseen the possibility of later upgrades.
Okay, back to your navigation. Version 9.12.14.429784 suggests to me that it is some version of NextGen (!!?). Pioneer version is 9.8.13.411863, so this is probably a very dedicated software. Good luck with search, but very little chance that something so fresh and rarely represented, could be found in crack*d version. After a few years, maybe ...
Will the Toyota's card work in Subaru or vice versa? I doubt it.