Enable features in your nuvi 12xx, 13xx and 14xx - JCV, LA, TTS

rogmann · 14th July 2012, 11:52 PM

I am also interested in this for the Nuvi 1300. I have SW 6.10 as well as Windows 7 64 bit
, along with 2013 map. I have tried for several hours to get the Lane assist and Junction view to install and have had no success, but most of that time has been reading on this forum and making sure I had not missed anything before I posted.

**lolypop000** · 15th July 2012, 01:03 AM

For win 7:

Right click on updater.exe and make compatibility with win xp sp3 and click save
Right click on updater.exe and click run as administrator
go to hidden menu over battery icon and then flash

Nuvi 12xx FW 6.10 (971)

[Only registered and activated users can see links. ]

Nuvi 12xx FW 6.10 MTK (1106)

[Only registered and activated users can see links. ]

Nuvi 13xx/14xx FW 6.10 (972)

[Only registered and activated users can see links. ]

Nuvi 13xx/14xx FW 6.10 MTK (1104)

[Only registered and activated users can see links. ]

**cat2115** · 15th July 2012, 04:02 AM

Originally Posted by lolypop000

Nuvi 13xx/14xx FW 6.10 MTK (1104)

[Only registered and activated users can see links. ]

i use this and flashing but it's said "no update available for this product" when i hit "ok" it cancel out. do i need to go back to old sw ver first than reflash the link file above?
my friend SW ver is 6.10 nuvi 1450

rogmann · 15th July 2012, 04:27 AM

I tried the one for Nuvi13xx 14xx 6.10 fpr JCV MTK.rar for my Nuvi 1300, and below is what I got. I am at a complete loss>

Originally Posted by lolypop000

For win 7:

Right click on updater.exe and make compatibility with win xp sp3 and click save
Right click on updater.exe and click run as administrator
go to hidden menu over battery icon and then flash

Nuvi 12xx FW 6.10 (971)...

Spoiler: pic

**cat2115** · 15th July 2012, 05:55 AM

I think got it to work. This is what i see. 28khgtu

in it own screen then it switch back to normal driving screen. Is this how it is?

rogmann · 15th July 2012, 07:00 AM

Now I have lost my map data I had on SD card. What map are you using?

**lolypop000** · 15th July 2012, 09:44 AM

touch battery until ur in diagnostic, click Next---start test--more.

Here you must see bootBLK 1104 if you have MTK or 0972 if you dont have MTK.

p.s.

On win 7 you can also try to install garmin usb drivers as administrator. (right click on garmin usb drivers.exe and run as administrator)

**cat2115** · 15th July 2012, 01:07 PM

Originally Posted by rogmann

Now I have lost my map data I had on SD card. What map are you using?

I'm using 2013.10 and full jcv. Both of theses are in SD card.
SD root/Map/2013.10
SD root/Garmin/JCV/xxxxx.jcv
However, I 4got to mention that b4 I flash, I remove SD card from Garmin. Not sure if this make a different.

**Strephon Alkhalikoi** · 15th July 2012, 03:13 PM

Removing the card from the Garmin before flashing was actually a smart move. However, it looks as if your directory structure is a bit messed up. Maps cannot be stored in subdirectories beneath X:/Map/ but must reside in the X:/Map/ directory itself. Thus, X:/Map/North America.img is acceptable. X:/Map/2013.10/North America.img is not.