Thread: Enable features in your nuvi 12xx, 13xx and 14xx - JCV, LA, TTS

You have installed map and JCV from this thread?

[Only registered and activated users can see links. ]

Try to add JCV in folder .System/JCV/ jcv file

You must unrar jcv before you add it in your nuvi.

p.s.
Do you have on your nuvi only CN or you have also some other maps?
If you have other maps look in settings that you have enabled only CN map.

Thank you guys
I downloaded other JCV presents in this forum...and now seems that work
I also updated the basemap :D

Now the inventory reports:
JCV D2504.14 2.00 Junction View (JCV) Working

I tested with a sample route but nothing is displayed ...I have to test on the road :D :D

THANK YOU!!!

Simulate route on highway and you will see JCV

Yes this tutorial will work with your nuvi.

Happy flashing and happy new year.

G'day Phantomguy,
Splash D1340-00 does not give SLI, LA or JCV. You need to flash the senior logo file to give Splash D1340.50 to enable those features. 1300 doesn't have a BT module so you can't enable Bluetooth. The flash won't disable your POIs [e.g. Cyclops] or traffic subscriptions.

Using the unit without a basemap will run you into trouble eventually. Load V5.01 from here: [Only registered and activated users can see links. ]. You don't need .sum files, they're only checksum files and can be deleted or left, it doesn't matter.

Easiest way for you to flash is to use acleite's universal microSD card method. Look at the base of Post #1. This will flash your non-MTK US 1300 and backup NV as well, extract it onto a clean card, insert it to nuvi and turn it on. Let it reboot before removing the card:

Spoiler: Click

[Only registered and activated users can see links. ]

Keep the files which are created in the root of the card, especially backup41.bin. Please backup your full file system before the flash [especially your favourites], and clear NV or hard reset before and after flashing.

PS: Mate, don't do consecutive posts. That just makes the thread even LOOOONGER. I've combined them for you. Better to use the edit button.

[Only registered and activated users can see links. ]

Use This ATTACHMENT Credits ACLEITE

Extract to the root of an Empty SD Card, Switch off Nuvi, insert SD card, Switch on nuvi

Regarding your PMs Phantomguy the thread is still very much active as you can see by the fact that you received 2 replies, 1 hr and 2 hrs after your first post.

Regarding your NA purchased 1300. It is almost certainly Hardware ID [HWID] 0972. There were very few 1300 produced with the MTK chip which is HWID 1104. The pack i've made for you using acleite's method will only flash a non-MTK chip HWID 0972 and will be ignored by any other hwid numbered unit. However, it will also backup both region 16 and importantly backup region 41 which could be used to recover from nonvol corruption in the future. Read about it here: [Only registered and activated users can see links. ].

If you're concerned and/or confused just do this:

1. Back up your internal files.

2. Ensure the unit's OFF.

3. Extract my pack onto a clean mircoSD.

4. Turn the unit on [you should see 'Loader'/'Software Loading' appear on the screen during the boot process]. Let it complete and then it should reboot normally.

6. If it doensn't flash [ie just boots normally without 'Loader' appearing], then use the universal file posted kindly by dasilvarsa which will flash either HWID but won't give you a backup of region 41. In that case i highly recommend that you do that separately, instructions are in the thread linked above.

5. The SLI and LA functions are drawn from the CN map. You will need to obtain the JCV file matching your CN version for Junction View to work. Each map version has it's own matching jcv file. Look in the current [Only registered and activated users can see links. ] for this file: D2563140A.JCV. If you want to keep using [Only registered and activated users can see links. ] look for D2563130A.JCV instead, or if you've got the [Only registered and activated users can see links. ] look for D2003140A.JCV or if space is tight, use the smaller D2867100A.JCV with less views. You can place the JCV file either on the unit in a folder named JCV in .System folder, or to save internal space it can go on a microSD card [x:/Garmin/JCV/*.jcv]. Never have older version jcv files or from another map type [i.e. sensis with HERE] together. Delete old files when updating the map even if you don't also take the new jcv file.

If you'd like to confirm your HWID before you start look in your unit's Inventory where you found it's Splash version [hold Battery symbol in top RH corner of main screen for ~5-6 seconds, then press Next>Start Test>More. In the very top 3 lines in the second field is your unit's HWID, you'll see B0972 or B1104. You can also find it in the unit's GarminDevice.xml file which is in it's Garmin folder. Look towards the start for <PartNumber>006-B0972-00</PartNumber> or <PartNumber>006-B1104-00</PartNumber>. I'm sure it'll be 0972.
Can't get more tailored help than that Mate.

Thx heaps Neil for your detailed reply. Forgive me for not including "Quote" of your detailed reply - trying to save thread length now. :-/ Also I feel like an idiot but how do I "click" LIKES? The only icon I see is a Facebook one and I don't use Facebook? Edit: Sorry I found the button now - silly me (again embarrassed)!

First let me say my Nuvi IS B1104 in both Unit and GarminDevice.xml as -

<Model><PartNumber>006-B1104-00</PartNumber><SoftwareVersion>540</SoftwareVersion><Description>nüvi 1300</Description></Model> --- BUT NOW is "620" not "540 since last GE update.

So I guess I disregard the advice given for non-MTK chips (as mine will be an MTK chip. Right?). And DO NOT run the Garmin.rar you attached for non-MTK chips. Right?

BTW @ dasilvarsa - is the file you attached in your reply (post #927) for my MTK? chip or the non-MTK? (Scared crazy to not use wrong flash). Neil advises me it works for both - but no backup of region 41.
Guys, what are these "regions" 16 and 41? Geographical? or what? Sorry for my ignorance. I would prefer to use the one FLASH specifically for my chip and which does ALL the "backups" - just want to do this ONCE and right way - Thx.

The 2014.40 Maps for AUNZ I am using on SD are unlocked SENSIS obtained from forum ************** before I realised I had registered here 1 1/2 years ago (embarrassed).
And I have BOTH files -"D2003140A.JCV or if space is tight, use the smaller D2867100A.JCV" - already in BOTH the SD\Garmin\JCV folder and the .System\JCV folder (just in case???). [Cyclops Safety Cams/Zones POI and Suna Traffic already working well].

Wont do anything until I hear back from y'all.
PG