Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 40
  1. #21
    Important User How to reverse  back your Garmin unit  to a previous FW version
    How to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW version
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    15,443
    Rep Power
    5069

    Default

    Attach nuvi usb, modify the sw version in garmindevice.xml to a previous version, in your case, for example 7.30 if you want to flash 7.50, don't remove nuvi from USB, put the *.gcd you want to flash on desktop along the Webupdater icon shortcut (they must be both on desktop), drag&drop the *.gcd in Webupdater and flash
    l9ebnsm
    You have to navigate to get to the good.

    Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600

  2.    Advertissements


  3. #22
    Junior Member
    Join Date
    Jul 2015
    Location
    PT
    Posts
    9
    Rep Power
    0

    Default

    Thanks for your reply.

    It seems having both the firmware file and the Garmin Express Updater on desktop is essencial, I hadn't understood that from the instructions.

    I edited the .xml file to 3.70, to update to 4.00. I had to turn off the internet so in Tools (in Garmin Express) finally the version appeared 3.70.

    But, there were no different options, like "additional info". Nevertheles, I followed the instructions, ejected the nuvi, turned it on, but the version is still 7.60.

    I tried with three different files from [Only registered and activated users can see links. ] 2.70 (nuvi2xx7_GCDFile__270.gcd), 4.00 (nuvi2xx7and2xx8_GCDFile__400.gcd) and 4.60 (nuvi2xx7and2xx8_GCDFile__460.gcd), no good luck with either of them.

    Any suggestions?
    Last edited by gmix; 8th July 2015 at 06:05 PM.

  4. #23
    Important User How to reverse  back your Garmin unit  to a previous FW version
    How to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW version
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    15,443
    Rep Power
    5069

    Default

    If you read carefully I wrote Garmin Webupdater and not Express, read my instructions again please.
    Code:
    Please Login or Register to see the links
    Please code non sharing host sites external links to avoid refback . Thanks
    You posted [Only registered and activated users can see links. ] and you got my reply and I uploaded a firmware file for you.
    l9ebnsm
    You have to navigate to get to the good.

    Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600

  5. #24
    Junior Member
    Join Date
    Jul 2015
    Location
    PT
    Posts
    9
    Rep Power
    0

    Default

    Thank you very much for your patience, #catymag, with webupdater it worked out easily, but...

    Only with the file you sent me in that link (nuvi2xx7and2xx8_530.gcd - HWID 2077).

    All the other files from Perry, from 4.70 and 4.60 back to nuvi2xx7_GCDFile__270.gcd, did not work... And the version 5.30 still does not allow for the installation of other maps in my nüvi 2597. From my investigation, I really need minimum version 4.60, but the one I got from Perry does not work.


    So, could you check if there's, perhaps in the archives, other option for version 4.60 HWID 2077?

  6. #25
    Important User How to reverse  back your Garmin unit  to a previous FW version
    How to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW version
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    15,443
    Rep Power
    5069

    Default

    Sorry I don't have it, I hope other member will help you.
    Good luck!

    sent with my phone
    l9ebnsm
    You have to navigate to get to the good.

    Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600

  7. #26
    Junior Member
    Join Date
    Jul 2015
    Location
    PT
    Posts
    9
    Rep Power
    0

    Default

    Thanks to #Giomen in [Only registered and activated users can see links. ],

    and to his file for HWID 2077, version 4.60

    [Only registered and activated users can see links. ]

    I have finally managed to roll back the firmware of my nuvi 2597 to 4.60.

    But... Unfortunately my device (Nuvi 2597) really does not allow for other maps than the one from Lifetime update, through Garmin Express...

    I've fished out more info:

    from #catymag' post, on 9th February 2015, 02:02 PM:

    Unfortunately as stated in OP quote

    New gimgunlock-0.03+MapSigPatch
    unlocks NT (not NTU) IMGs in newer devices, but not working with all new devices 2xx9
    If you have 2xx7 (8) (PartNumber> 006-B1582-00), works

    If you have 2xx7 (8) (PartNumber> 006-B2077-00), doesn't work. [THAT'S MY CASE]

    Your device have a new protection in firmware.

    And also from #Cents:

    I am a new member and a complete Newb at updating maps in a GPS. I just bought a Garmin Nuvi 2597 from Costco Canada a week and 1/2 ago. Right after I got it I used Garmin Express to updated the maps and a software update (I think a firmware update but not completely sure). I have read a large part of this thread and others and have checked the Garmin XML file and it has the dreaded "PartNumber> 006-B2077-00" near the beginning of the file. Is the part number tied to the physical device and so is unchangeable and I am simply done until someone finds another way around this with a new gimgunlock or similar, or is the part number tied to a firmware update that I might have done, and if I roll back the firmware based on info in this forum and use the latest gimgunlock I could then install a Garmin European NT map?

    Answer by #catymag: @Cents.
    Sorry actually you cannot unlock maps with unlockers in your device.

    So, I thank a lot for the help - it's a great forum - and I'll be waiting till some genius can figure out a way to remove this protection from Nuvis 2597 (and the others) with part-number "HWID 2077"

    Cheers!

  8. #27
    Junior Member
    Join Date
    Dec 2015
    Location
    north canada
    Posts
    1
    Rep Power
    0

    Default

    That didn't work for me ... I have the Astro 320 and I am trying to go to firmware 4.4 to 3.4

  9. #28
    Garmin/GPS Systems GMod. How to reverse  back your Garmin unit  to a previous FW version
    How to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW version
    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    5,648
    Rep Power
    1567

    Default

    That's a bit light on info Mate, 'didn't work' is a tad genetic. However, a common problem is that an attempt to go directly back to the desired lower version fails with some units, Astro 320 is one such unit. When a progressive step-by-step to the next lowest is tried it will work. i.e. one at a time: 4.40>4.20>4.00>3.90>3.80>3.70>3.60>3.40. Read fully and then post again back in the following thread if you need more help: [Only registered and activated users can see links. ]. The problem was first noted going back from V3.70 to 3.40 as per [Only registered and activated users can see links. ] there.
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  10. #29
    Member
    Join Date
    Apr 2015
    Location
    México
    Posts
    15
    Rep Power
    0

    Default

    Hi I need to downgrade a driveluxe 50 so I can use unlocked maps thanks


    Enviado desde mi iPad utilizando Tapatalk

  11. #30
    Important User How to reverse  back your Garmin unit  to a previous FW version
    How to reverse  back your Garmin unit  to a previous FW versionHow to reverse  back your Garmin unit  to a previous FW version
    Butters's Avatar
    Join Date
    Jul 2017
    Location
    CA
    Posts
    1,461
    Rep Power
    1058

    Default

    @hcch
    You won't achieve anything at all by downgrading the firmware. All versions from 2.80 to current 5.30 have strong MSV protection so you must patch the firmware, use the latest V5.30 for that. As there is also GVS protection, the patched firmware must be loaded as an RGN file in pre-boot mode using Updater.exe but only for initial patching. Subsequent patched versions can be done by a GCD file ongoing. Read this thread: [Only registered and activated users can see links. ]. I also gave you that thread's link several days ago over here: [Only registered and activated users can see links. ]. There is (currently at least) no other way to use unlocked maps on your DriveLuxe. Post in the Patcher thread if you need more help, but read the first several posts at least before posting there. Pay particular attention to Note 3 in Post No. 2 should RGN_Tool fail to flash the RGN file.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •