Likes: 
Reply With QuoteThat's quite odd behavior. It might have a hardware fault. Have you tried to hard-reset it?
Edit: Just saw your edit made a few mins after my post. I thought you'd tried flashing original fw before. You probably should reset it, or better still clear NV on it now that it's booting up properly, in case there's some left-over garbage data from it's malfunction: [Only registered and activated users can see links. ]. Then backup NV afterwards: [Only registered and activated users can see links. ]
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 21 to 24 of 24
-
4th February 2024, 09:09 AM #21Junior Member
- Join Date
- Jan 2024
- Location
- FI
- Posts
- 7
- Rep Power
- 0
When connected to PC: computer logo yellow, not connected to PC: gray logo.
Originally Posted by Butters
Edit: With Cure3, i make Original FW and updated with Updater.exe.
Device works now OK. Many Thanks for help to all!
Last edited by SKdrive; 4th February 2024 at 12:55 PM.
-
4th February 2024, 12:52 PM #22Important User
- Join Date
- Jul 2017
- Location
- CA
- Posts
- 1,453
- Rep Power
- 1057
Last edited by Butters; 4th February 2024 at 01:11 PM.
-
4th February 2024, 06:42 PM #23Junior Member
- Join Date
- Jan 2024
- Location
- FI
- Posts
- 7
- Rep Power
- 0
Cleared nonvol and make NV backup: root folder 41.bin 0 kb, HWID number folder: last_id.bin 1 kb, ldr.bin 1 118 kb, update.log 1 kb, update.txt 1 kb.
SD formatted in device, then copy folders and files. Boot with card, show Loader text and green bar on the screen.
Edit: Made mistake: rrgn,154,2:/154.bin in update.txt instead 41.
Result: root folder 154.bin 4096 kb, hopefully correct now.
Thankyou for help!
Last edited by SKdrive; 4th February 2024 at 10:08 PM.
-
4th February 2024, 10:25 PM #24Important User
- Join Date
- Jul 2017
- Location
- CA
- Posts
- 1,453
- Rep Power
- 1057
The NV region size should not be be 0 bytes. It should be at least 4MiB.
In most later devices like Drive series the NV is in region 154 rather than 41 and the path to card is "2" not "1".
Please post the contents of "update.log", but first remove or disguise the UID & HWID 10 digit numerals.
Just saw your edit as i was posting. Should be all good now to use it normally. Keep 154.bin for the life of your device, it might save it in the future.
Bookmarks