Thread: Firmware patch for Garmin Drive 61

I hope thread is not so old. Who will help me to solve same situation as premmod's? I always get error system software missing, even after converting gcd ti rgn and successful update in pre-boot.
I tried to patch firmware and bricked it. :P So, someone please help me to revive a poor device? :P
Here are all stock informations about device:

Model: Garmin Drive 61
Hardware ID: V4 M4v3 P8 8GB CB S06 A6 RT BT
Device ID: [Removed]
Software version: 6.00

PartNumber>006-B2587-00</PartNumber> (took from original device xml file), so HWID is 2587

Thanks in advance

Originally Posted by maxili

I always get error system software missing, even after converting gcd ti rgn and successful update in pre-boot.
I tried to patch firmware and bricked it. :P So, someone please help me to revive a poor device? :P
Here are all stock informations about device:...

System Software Missing in it's most benign form simply means that the flash has been incomplete. In such a case the device defaults to preboot mode and re-flashing either the original firmware or properly-patched firmware as an RGN file via Updater.exe will restore it. Go to this thread and follow the guide if such re-flashing original firmware doesn't help: [Only registered and activated users can see links. ]. At it's most problematic the device may be 'hard-bricked' due to an incorrect software being flashed previously. Double check the HWID with [Only registered and activated users can see links. ] if preboot mode is available to it. Due to the similarity in names and closeness of HWID numbers there is a real risk of DriveSmart 61 (HWID 2588) and Drive 61 (HWID 2587) firmware being accidentally cross-flashed.
PS: IMPORTANT: You should edit your original post to remove or disguise your Device ID (UID).