Likes: 
Reaching preboot in itself isn't doing anything, so even if your unit is in preboot if you don't start a flash with Updater.exe it will simply take itself out of preboot within a short period.
You need to check some things, I don't have any access to an eTrex at present but if that series retains a copy of gupdate.gcd on the unit it will need to be removed before doing anything otherwise it will try to flash again from that wrong file after the proper firmware has been loaded. In explanation: 'System Software Missing' message means the unit has been flashed with incorrect or corrupted firmware. Try to access Mass Storage Mode. If your unit can't be seen in MSM by PC and it has gupdate.gcd on it you will need to load cure firmware to be able to access MSM. If you can access MSM, either now or after the cure, remove the GCD file and then flash the original firmware [software] as an RGN file using Updater.exe only. If you're not sure, you could flash it with original fw anyway and if it starts to boot but loads firmware again you'll know gupdate.gcd is onboard.
Some reading for you:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ] [it's for nuvi, but if necessary similar steps are involved to enable you to remove gupdate.gcd]
[Only registered and activated users can see links. ]
and this one should you need it:
[Only registered and activated users can see links. ].
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 10 of 11
Threaded View
-
22nd July 2014, 07:53 AM #4Garmin/GPS Systems GMod.
- Join Date
- Aug 2011
- Location
- Oz.
- Posts
- 6,356
- Rep Power
- 2502
Last edited by Neil; 22nd July 2014 at 08:01 AM.
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
Reply With Quote
Bookmarks