Thread: Enable TMC in a nüvi 250W

Over the last 3 years I converted about 100 Nuvi 2xxW hwid 0827 in Nuvi 465 (fw_all from 465 + boot from 0827)(to justify humiliation Giomen about theoretician Working in one of the few service centers in the country Garmin difficult theoretician).
In Ukraine, this operation is not very popular, because the map of Ukraine does not contain information for trucks in full.

Spoiler: About flashing procedure I was writing rutracker almost a year ago

[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
+and we have published on our website ready files to flash for a long time

Originally Posted by Alviora

to justify humiliation Giomen about theoretician Working in one of the few service centers in the country Garmin difficult theoretician).
In Ukraine, this operation is not very popular, because the map of Ukraine does not contain information for trucks in full.

Let without insults. You are seller only and POUCHx was author of this simple conversion but for me more interesting experience and curious man and women...

POUCHx methodology differs, it is more elegant and is not just a component firmware using RGN tool.

Spoiler: lyrical digression

Once again, I repeat: I do not sell anything, only service.
And about ideologues and instigators of research directions Garmin we have never forgotten.
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]

Sorry but I am reading English without dictionary! Russian language reprint is not worth for me...

Oh Dear! We have a clash of sorts ... let me end it. I know PouchX's method is far more elegant and of course results in a 'fully converted' 465 with HWID 0943, and i have used it. It's probably VERY safe, i know his reputation. I didn't recommend it for smokefree because he's wanting only to try the conversion. It's much easier to 'come back to' 250/255W by retaining the HWID 0827.

So please Alviora and Giomen, have your little tiff via PM or i shall put on my Mod hat and start trashing posts. I acknowledge that the two of you have far greater firmware knowledge than i have, I admire and respect you both but won't tolerate derogatory personal opinions being expressed openly any further.

Originally Posted by smokefree

What't the difference between the two methods? I don't mind following either one. What I hope to get out of it is not so much the nüvi 456 but the learning experience. Important for me is that I have a clear view of the path to walk down: doing the necessary homework myself by reading up instructions and where necessary receive guidance that is not open to misinterpretation. As I am still a novice in the field of FW modding, I do not always know which parts of the Tutorial Section are relevant to my issue. But each day I learn more!

Imho, using the 0827 boot bin is easier and safer for laymen. Please don't do anything further if you're uncomfortable with a further conversion, but my attitude is 'wothehell'. Your unit is worth sweet-b*gger-all anyway. I can buy 255W for $20-30 depending on condition and 250W are worth even less.

There is no tut in the Tutorials Index at present for this simple conversion but it's modding '1.01'. The basic instructions you need are in Post #28 along with the necessary files, and the specific procedure is:

1. If you have GUPDATE.GCD in your Garmin folder, remove it before doing anything
2. Drag the rgn file onto updater.exe, select the 'USB Device' radio button and leave it visible on your desktop ready to click 'OK'
3. To get the unit into preboot, hold the upper LH corner of the screen and plug the in the miniUSB to the unit [have the lead already connected to a rear port of the PC]
4. Immediately your unit details appear in the USB window of updater.exe, click OK and continue to hold the screen until 'Loader' appears on the screen
5. Let the flash finish, then enjoy your 465T.

Make sure you do the backups and reset as in Post #28 [that's essential!]. If unsure of anything, please ask.