Thread: IMPORTANT! If you want HELP in case of a bricked Garmin device, please follow this

Hello I need help with my Garmin dezlcam LM. It has boot loop, with only GARMIN logo showing. I recenetly learned about pre-boot mode and Garmin Cure. I managed to turn on pre-boot mode and now i have Garmin logo with the LOADING... info but when i connect it to PC nothing happens, in device manager it shows no change. Is there anything I can do?

OK. I managed to make a step further. Turns out preboot mode only lasts a couple of seconds in which i had to click update in garmin cure. It showed loading bar for a second and my unit now shows garmin logo with "software missing" text. It's visible in device manager as GARMIN USB GPS under gramin devices. but now what? It doesn't show in my computer.

I also didn't know what to pick in garmin cure whether original or cure. I downloaded ~55MB software from

Code:

Please Login or Register to see the links

named "dezlCam_380.gcd" I hope it's the proper one. Using cure option with this file got me to when I am now. If i click the original It warns me that the current software is of the same version as I'm trying to load. If i continue it shows erasing for a seconds, my unit restarts and shows garmin logo as in the beginning.

sometimes after using cure after software missing text, it shows software loading... and it shows me this error

Spoiler: image

[Only registered and activated users can see links. ]

and just stays like that (it's visible in device manager but nothing apart from it)

I think the main problem is that I have like 2-3 seconds when i touch the space between G and A letters when it shows moving up and down "system" text. After that time the system text disappears and it shows Loading, but when loading is displayed the unit disappears from device manager - it's only visible for updater.exe during those 3 seconds. And when i click OK in updater.exe during this time it just shows "Erasing" bar for like one second and the unit reboots with "software missing info" I think installing software should take longer than just erasing... Could it be a hardware fault?