Thread: IMPORTANT! If you want HELP in case of a bricked Garmin device, please follow this

Okay, this is what I did:

- I used my Windows PC to re-format the storage of my etrex 10 (FAT-Filesystem)
- I opened GarminCure3
- I opened the file eTrex10_Webupdater__360.gcd in GarminCure3
- I made shure "cure" radiobutton was ticked and I pressed the "make firmware" button
- Output was "Patchable HWIDs: 1304, Processing HWID 1304"
- I clicked on "Udater.exe"
- I chose my garmin device in the USB-Device Dropdown Menu
- I clicked OK
- Then I waited for a few progress-bars to complete
- After a while a saw a success-message on the Screen of my PC

MSM is not available. When I connect the device, it's not detected anymore. On the device just the Garmin-Text shows on the screen.
I did not confirm the HWID. I was not aware of the fact I needed to do that. Maybe that's the cause of my device now being bricked. Maybe the HWID of the FW I used did not match the HWID of my device. In case I used the wrong firmware, is there anything I can still try to save the device?

Thanks & kind regards